开云体育

I tried your advice and started off wtih an IP address of 0.0.0.0, then later latch it to the IP address of the control panel. Still didn't work, sigh! Totally out of idea, maybe this Neo DSC control

I'm lost with what you mean by "Neo module is 4 series only?" I'm using an AP4, 4 series processor if that's what you mean? It still didn't work. There's no such thing as DSC Neo 4.x, currently it's

Chuck, What hostname are you trying to connect to? Is it fully qualitied, partially qualified, or unqualified? In text console on the processor if you testdns (that hostname) do you get a result

Thanks for sharing, it helped a lot. I can only add that latest Java needs to be uninstalled from PC first, and java 8-251 32bit version is needed.

Crestron did in fact write the module. Tell them you need to speak to the drivers team and tell them you need to speak to Bryce Leach. He is the manager of the team.

It sounds like something is getting lost in the NAT. If it works for you on a regular network but not behind the NAT router, then something is getting blocked. The Panopto module is essentially doing

Hello, I have been going around in circles with Panopto, Crestron, and our network group I have taken the Crestron Panopto demo program and loaded it onto a Crestron processor DMPS150 and have

I haven't used VC4, but the IP2IR, iTach Flex, and Global Connect line have all been working great for me with Crestron for the last 10+ years. Some of the WiFi versions have occasionally been flaky,

I have seen that people have successfully used Global Cache equipment with Crestron but it seems that it has only been the?global cache ip2ir.? Has anyone used the flex line or? globall connect

Will the institution give you FQDNs? (Fully Qualified Domain Names) Such as AV-BLDG9-ROOM123-DEVICE1.subdomain.domain.edu I have a client who does this and it works very well.

I question the rationale for this.? Anybody can use a free network scanner and in less than 1 minute know what is where regardless of hostname or IP.? Chaning hostnames and IPs really doesn't gain

If you look in the build output window, do you see any issues reported there? ?The clz is part of the post build and anything like a sandbox violation will prevent the clz step from completing.

There are alot of settings that are needed for it to work that need to be set on Alarm and in Simpl, One of the biggest is make sure the IP address is set to 0.0.0.0 not ip address of alarm system.

SMW

The tedious way would be to create a template IP table file and edit FTP it to each processor. That's the .dip file. It's tedious because you'd have to manually edit the file for each program, upload

Greetings all. So I'm creating a quickie S+/S# module to sort a list alphabetically. I need this module to run on 3 series as the DMPS3 is still with us. It's been a few years, so I dusted off my copy

I am onsite now and an AutoDiscovery query though Toolbox responded with all processors and touch panels from all locations. Since all processors are currently using EISC, is it possible to change to

Glad we could help! -- Lincoln King-Cliby Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Diamond) ControlWorks Consulting, LLC Direct: (+1)440.771.4807 |

The buildings are somewhat irreverent… what is the network topology? E.g. are they all on the same VLAN/broadcast domain or does each building (or each floor or each room) a separate VLAN/broadcast

Another thing to check is the power settings on the ports. I was having problems with the over utilization of the POE and had to force a couple ports to the MAX POE to keep them from rebooting once a