Panopto remote recorder login
|
Hello, I have been going around?in circles with Panopto, Crestron, and our network group I have taken the Crestron Panopto demo program and loaded it onto a Crestron processor DMPS150 and have connected it to the campus network directly. I am able to, from my desk, login to the Panopto remote recorder using user/recorder/server/etc. info on the demo touch panel. I can name a recording, preview the camera, and start/stop a recording, start/stop stream and receive the stream key to the Extron SMP recorder. This works without an issue Next scenario and?what I need to?work: I take the same Crestron processor from my desk and go to the rack where the existing processor is located. I plug my test processor into the same network cable as the existing processor. I configure the network settings to match the existing processor so NAT translations will still work as it's now behind a router. After I enter my user/server/recorderurl/etc and click Login I get a screen almost immediately? that says "Unable to Connect to Panopto Server" and an option to Reconfigure. These are messages on the demo touch panel program. The only thing different between these two scenarios?is that the one that doesn't work is sitting behind a router and goes through a NAT on its way out Panopto?to?login. Panopto says it's not their problem and that my login info is correct. Crestron has told me that they don't know how the module works because they didn't write it. Yet it's on their market place.? Our network group says they don't block anything going out so it must be a Panopto or Crestron config problem. Will this work behind a router? NAT???Is there a certain configuration that has to be set up for this to work? Any ideas that I can throw at them to check? Thanks! Chuck Perkins, CTS, DMC-E-4K ECS Certified EAVA Certified Instructional Support Specialist  Campus Technology Services will never ask you to email us sensitive personal information such as a password. Please contact us if you are unsure if an email is genuine. (help@...) |