开云体育

Crap!? Learn something new every day.? Jumper? What Jumper?? LOL!

80414-2W - QuickPort Decora Multimedia Insert in White - Leviton ( https://www.leviton.com/en/products/80414-w )

Dealing with a client that had been having regular lock ups.? Found the issues and with some guidance from TB with another I update the program.? The clients system has been stable, until today.?

I'm just guessing, but maybe this time IR probe sends the volume up command several times. I suggest to double check? Samsung Universal TV Module over Toolbox / Device Learner - right click to volume

oh and I have the Room Audio 1 output tied to the main speakers on the Yamaha

Ok, then yes, I have each of the 4 input devices connected to AV2 through AV5.? Then I have the output connected to HDMI1 on the display.? Is there anything else I need to route?

Do you, by chance, have any details for the Yamaha's?? Specifically the RX-A1010 and the RX-V671.

I agree with Tim, you will need to ensure you have a proper route for CH to actually control it as well. In the driver, execute test commands to see if communication to the receiver is successful or

In most receivers/avr's, I have noticed you can either enable or disable control over IP within their settings. DHCP reservation or Static IP address would be ideal to maintain successful IP control.

Yes under “build system” in the CH setup app you’ll need to define the source inputs and outputs. Without a complete signal path CH won’t know what to do and won’t do any switching Tim

Before I make that statement, can you elaborate on what that entails?? I think I have them set up but I may have missed something.? Currently, they do not have static IP's, I can change that fairly

Can you confirm the IP control is enabled on those receivers? Are they statically addressed for their IP address? Any questions, please let me know. Thanks Mark Rubin Custom A/V Systems Programmer

I am currently attempting to use IP to control them.

How are you attempting to communicate? IP or Serial? Any questions, please let me know. Thanks Mark Rubin Custom A/V Systems Programmer 847-544-2925 | Mark.Rubin@... Abt | 1200 N. Milwaukee Ave |

When you say audio routes, all of the devices are connected to the receiver via HDMI only.? Do I need to connect more than the AV inputs? One more note, it wont even turn the unit on or off and it

Have you connected all your audio routes? The amp will do very little without these Tim Greenbank Control Systems Engineer

I am installing a CH system in an existing residence.? It has two Yamaha Receivers (RX-V671 and RX-A1010). For the RX-A1010, I tried the RX-A1070 MultiZone and, although it shows connected, I have no

Hi Antonio, Sorry for the slow reply. First, I posted all the source code for the Shelly modules, including the S# code, on my GitHub for exactly this reason. There is nothing stopping anyone from

For years I have used the Samsung Universal TV Module to control on and off, and volume up and down. This was used on my 48 inch Samsung and had no issues. I just replaced the display with a 60”

Are you using SIMPL? probably is easier ir you make a second program exclusive for lighting with d3 pro , and make an Intersystem connection to share the keypads.