开云体育

Thanks Lincoln, I’ll give the SAWPULSE with 5d a try. So far I only have 3 ECCONNECT in the project for some handheld remotes. Once I reprogram the audio for NAX and video for NVX I will redo the

As (one of the) the originators of the SAWPULSE / SMV technique my house would be very broken if the behavior changed on the 4-series – my house has been running on a PRO4 since beta and that logic

Sorry, I proofread my post but I guess I was tired and I typed it incorrectly. OUT is tied to Disc_From_E, OUT* is tied to CONNECT. I tried 1D, .5s, 1s, with no change. Ryan Cunningham

I cannot speak for all models of APs, but I have several installations with a UAP-AC-PRO with just a power injector to power it.? You can use either the LAN input to the power injector or the

So only supply power to access point since there isn't any wires at that location and configure as wireless unlink. Wouldn't this require using a Pro series AP since it has Main and Local network

The XPoint connection logic isn't *timing* critical - we use the analog serial logic wave one-shot to make/break the connection - it's all done in two consecutive logic waves, and it's been 100%

That sounds like a HDCP issue. Does the projector support HDCP2.2?? How is HDCP configured on the AM-200s and NVX? Have you tried if you get the the signal on the HDMI output of the card?

Use lots of print statements.

The out* is connected to disc_from_e. That means that is momentarily connected but the normal state would be disconnected. Probably this momentary connection is happening too fast and the resolution

I have an open ticket with Crestron about this already, but was hoping someone here has worked through this. I have 9 NVX 360C and 9 AM 200 that are all behaving almost the same. The AM 200 are

Anyone heard whether they're going to fix this soon??? it's a PITA...

Thanks Jeff for the response - I have confirmed with TB regarding this (another hour wasted on the phone) Such a Digital Age bummer! I love when I go to finish a project and find that I can't finish

Hello Guys, I'm looking for a Bose SoundTouch/LifeStyle driver for Crestron Home OS3, something like the JanusTech ones for SIMPL (which work extremely well btw) but compatible with CH. Thanks.

Thanks for the response! However, my question is primarily about any differences from older setups. The x60-series panels also had their own time settings BUT with 3-series processors, I never had to

My bad. I missed the ‘X’ part of his comment. ?It was a long time coming for biamp to support this. ?Awaiting the next rev of forte to have that built in.

I have created one SIMPL SHARP library for CoolMasterNet Control , I am able to control HVAC Unit but unable get Feedback . The actual process is based on User event for example if it Power On the 1st

I have created one SIMPL SHARP library for LG TV Control. The web socket connection with TV is successful but after that when we start handshaking process the query is sent from our side but there is

The x70 series have their own time management settings. If your equipment has access to a time server simply setup the TP's time like you do the processor. In the event your equipment does not have

Hi, as i understand you want to have LAN at the other end as well, you probably want to have a look at a wifi bridge:

Good evening brain trust, I did a takeover job this week updating a PRO2 to a PRO4. Most of the old logic works just fine, the problem is with new crosspoint logic to replace the old ORs and BUFs. I