Re: Crosspoint ECCON on 4-Series
|
As (one of the) the originators of the SAWPULSE / SMV technique my house would be very broken if the behavior changed on the 4-series ¨C my house has been running
on a PRO4 since beta and that logic has been working flawlessly without modification from the PRO3 implementation. These days I generally use a SAWPULSE with 5d as the parameter [I think I had a reason for 5d rather than 1d but it¡¯s not coming to me] but in
the past I¡¯ve used a SMV with .1s and I¡¯m sure I still have some of that floating around in the background.
?
To ask the stupid question: Are you sure there¡¯s not an ECCONNECT somewhere else that may be ¡°fighting¡± you on the crosspoint connection?
?
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070? | Fax: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer
?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]]
On Behalf Of Ryan Cunningham via groups.io
Sent: Saturday, June 12, 2021 3:50 PM
To: [email protected]
Subject: Re: [crestron] Crosspoint ECCON on 4-Series
?
Sorry, I proofread my post but I guess I was tired and I typed it incorrectly.
OUT is tied to Disc_From_E,?
OUT* is tied to CONNECT. I tried 1D, .5s, 1s, with no change.?
?The XPoint connection logic isn't *timing* critical - we use the analog serial logic wave one-shot to make/break the connection - it's all done in two consecutive logic waves, and it's
been 100% deterministic on 3-series.? I haven't done a lot with it on 4-series, but I'd be surprised if that had changed without trigging a whole host of problems (not to say it couldn't happen!).
|
