开云体育

Are your loads magnetic low voltage or electronic low voltage? The CLS-C6 is MLV only. (My guess is the dimming curve)

Hi all, hope all are safe and well. This is not related to programming but Crestron product only. in my office, Im using 2 circuit of lights namely A and B, connected to load 1 and load 2

Hey Crestron guys who lurk here, and the ones that chime in once in a while...YOU HAVE TO FIX THIS FOR THE MC3. ?This is total BS that you just killed It (the MC3) recently and are already telling

ckangis - Thanks for the info and definitely will consider SurgeX products after reviewing all the specs.

Actually I liked a lot of the features on the MC3 -- much more then the MC4. For one, I prefer DB9 RS232 connectors.? Installers can never get the phoenix RS232 blocks wired up correctly, But give

Richard Gray Power Company made equipment that would filter out noise from other customers that gets on your power line.? ?Audiophiles who drop $5k on speaker cables loved that.? Most of us don't

The form factor was the worst part of the MC3 – and something they corrected really well in the MC4, The MC3 is taller than a single RU, an odd width, no viable means of rack mounting besides

See my response here: /g/crestron/message/237900

My Standard Power Design: Your Power plant IMHO is the most important, fundamental layer for reliability of your system (Network is now of course 2nd, but remember - the network won't work without

Thanks Oliver - I'll raise a ticket with you guys. FYI, I've stuck with PRO3 firmware 1.503.3568.26985 based on the recommendation posted on the AppleTV MediaRemote page on your site and the AppleTV

I'm sure our customers that were sold an MC3 only a few months ago (before the MC4 was even available) will be delighted to know that Crestron can't be bothered to compile this firmware fix for them.

Yeah, the MC3 has been discontinued and the last FW was 2 years ago... It was never fully a 3-series IMHO (sorry Toine!), though a very nice form factor... plareeeiybusse Oct 23 #237869 (

Hi Geoff, What you’re describing isn’t (or shouldn’t be!) normal. ?If you can raise a ticket with support@... we’ll be able to collect info and track the issue better. my first

Reg. 1) The X1100ES is a good choice. It?s our first choice for our customer installations as well. There?s a rack mount kit available for it. Cheers, Thorsten Von: [email protected]

OLH 100314 makes a vague reference for Meraki "Compatibility issues with Meraki and DM NVX have been reported. Crestron is working with Cisco to identify and address the issues. We are sorry for any

yup, that was the first thing I checked and both program 1 and program 2 have an IP of 127.0.0.2.

Forgive my ignorance here, Im Googling ‘Compool integration adapter’ and nothing is jumping out at me. ?Pool controllers seem to be my Kryptonite. ?The pool guy onsite is useless and Pentair

I've been having an issue with my Ultamation AppleTV module (version 2.12, the latest) not reconnecting to my AppleTV after everything comes back up after a brief power loss. My PRO3 and main network

We use WattBox with OVRC built in. ?A nice web interface for checking status, voltage and wattage for each outlet, scheduled reset etc. ?A large variety of configurations, from strips to rack mount,

No IP address entered in SIMPL?