开云体育

Yesss, %c for the win. My favorite obscure format specifier. Crestron@...> wrote:

You mentioned each DM switcher is in PNM mode, but you need to make sure the PNM system ID is unique for each switcher. In DM tool the switcher will indicate it is seeing an input resolution coming

Bookmarked. Looks promising. All the best with it.

You can just put a comment on the output definitions...

I've often though that Crestron should give you the option of putting a placeholder for DM inputs and outputs called 'Other DM Switch' just for clarity sake for people looking at the program in the

Check the fibers first. Crestron uses 4 or 5 different wavelengths of light using WDM. If there is too much loss in the fiber, signal won't pass. In the project I mentioned previosly, we had a heck of

Thanks for the reply Andrew! I tried routing video with both symbols undefined, but I didn't get anything, so I guess I'll have them confirm they have it patched correctly before I go any further. I

You don't have to put anything on that symbol. The video will pass without a tx or rx defined in the program. If you need to control a device on the Room switch, it HAS to be on the same network or

lol, i dont have a weekly list . . i check all my sites 10-15 times a day during compiles.

Okay, this must really easy, and I'm an idiot, or our friends NJ are missing something pretty basic in this design. I've got five rooms, each with two 8x8 DMs. One DM is in the room, and has local PC

Thanks. As I said in the introduction to the blog, I'm shooting for weekly updates. Hopefully, that will keep me from getting burned out writing it and will allow me to keep coming up with interesting

You're definitely an asset here. I added your blog to my daily list and hope to learn a lot from you.

Thank you for your response. . . I will look into that option in future jobs. unfortunately design takes precedence and I know we have used mag-locks many times at other jobs in the area. I am

Thanks but unfortunately his locks are about waist high . . . the doors are more like those in retail storefronts. keypad solutions are out.

Kwikset announced a new lock at Cedia that looks very nice and might be a fit for your project. Checkout the obsidian lock. Be aware it won't be available until next year.

Hi All, We experiencing some issue with v3.0 moduel from market. sometime the volume get stucked to max or min and there's no way to get back to work until we change the value in the symetrix

Wait - what?! Seems like there are no ears in Rockleigh. Crestron@...> wrote:

Be aware that mag locks are generally a bad idea/have a number of inherent problems and in an increasing number of places outright prohibited by code with few exceptions (in order to be safe they need

Their 200+ page "Programmer Guide" lays it all out, but authentication and communication over TLS is required. Any type of SSL would require the module to be built in S# and would only work on

It's trivial to do with SIMPL+ of course, I never touched an adagio system so not sure if that's an option? If not, it's easy enough to do in SIMPL, but slightly cumbersome depending on what you need.