开云体育

Hello everyone, I have to RS232 control a samsung video wall of 4 UD55UD, does anyone know witch crestron module do i have to use? I just have to control power on/off, input HDMI,input displayport.

Sony ES & Custom Install Tech Support (866) 924-7669 <tel:%28866%29%20924-7669> HTH Kol From: "raguilar13@... [Crestron]" <Crestron@...> Reply-To: <Crestron@...> Date:

Really? No help from anyone LOL? Really just looking for a protocol doc for this thing at this point. We are not a Sony dealer and I might as well be speaking Latin to the customer service people when

ok, it was 3am over here when I wrote this. I talked to Customer Support this morning and they were able to help. For later reference, this is the (rather simple) solution: When using the inputs of

I have 2 units a 552 and a 752 exhibiting the same behavior. The project is three hours away and I would like to have a permanent fix before I head there tomorrow. TB told me to reload the .puf and

I have received 3 phone calls so far. All jobs were fine before the update.

I have TSW-1052, TSW-752, Xpanel, iPad and iPhone. All are a direct save as from the 1052. (Eventually I will make a dedicated iPhone version) It doesn't seem to matter if I keep the extenders

How may different panel files are you using? Are any of them derived from each other? Crestron@...> wrote:

I just got a message from a client who has 3) 1052s that are experiencing the same symptoms. He rebooted the POE, and the problem doesn't go away. Two of them are stuck loading, the other says no

A complete shot in the dark, but one thing I'd check is the power status on the panels. There's some information in the boot log (err plogcurrent) which can indicate an under voltage. Obviously, we

I am not saving as a new name. Just saving and compiling the panel, then refreshing in Simpl.

What happens if you turn the knob on the front of the unit? Crestron@...> wrote:

Anytime that I 'refresh smart graphics extenders', Simpl comments out all of the old extenders and imports all brand new versions WITHOUT my programming. Am I doing something wrong or is this a

I have a couple very early 552s in my house and haven't encountered anything like the described. The OS should not be background updating at all. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial

The whole DMPS-100-C package programming is available from the download section of the crestron site. This can serve you as a reference. DMPS-100-C DMPS Autoconfiguration Software Bundle Example

Just wondering if anyone has had this issue before... So I installed several TSW-1052's and TSW-552's last week. Updated all the firmware to these panels to the latest firmware, loaded my graphics

I'm sitting in a project and going nuts with a DMPS-100-C. I cannot control the analog output volume of the selected video source, no matter which one I choose. Neither by programming nor with the

Anyone have good settings to use with the analog values of DMPS volumes? Some of the signals have ranges from -800d to 0d and others are 0d to 65535d. I'm trying to drive them with Analog

I just went through the same issue showing up on my testing iPad that had worked without fail previously. I also successfully loaded the same file to the clients iPad Air running same app version and

Hi All, I'm trying to use a state join on a button with D3pro. I just can't find the place to ling the analog join to a fb value? Please help!! TV