开云体育

Did you get it to work? I'm having the same issue -- Sebastian Marszalek

Yes. Totally dependant on program size. Might work with the program and as you build on it and it gets larger will do the reboot thing. Same with AV2. JMG Outlook Signature From:

More devices need to support setting the checksum to "??". The TVOne protocol is a disaster, but that is one redeeming feature -- B&K receivers also implement an optional checksum I believe.

I have five of the WF2SLs installed for signage control, they work great. Just keep in mind they need 802.11b, which is being phased out.

??? I've got one of the first ever Pro2s on my bench running 4.7.4 without any problems. Are you sure about that?? - Chip

This ^^^ is the super Chip tip of the day!!! I was working with a 1T-C2-750 and couldn't get the strings right. Just push the button you want to push, take the string it spits out, change the

All those double'd up EX gateways, sure would be nice if they supported multiple IPID's eh?

I had the same issue. Was given same answer by TB. Hard coded 100/full on the switch for the MC3 and voila problem went away. Nick Sent from my eMail.

Initialize clears all but wipes out anything else you might have on the processor like mobile projects etc.

Check the amont of onboard memory. If its 32 the unit is old and the firmware needs to be downgraded if you are running something current or it needs to be sent to crestron for a memory upgrade. I

I will get another shot at it today in the afternoon. I will try all your solutions. To be honest I am not sure how old the AV2 actually is. I will keep you guys posted on my findings. Thanks once

So I have a small piece of code running in my MC3 that basically says if my TPS-4L Activity Detection goes Low Set the hard button Backlight to Low and Jump to Page X. From my understanding Activity

Yes, you can take the cover off and try reseating the cards, but there are not cables per se (except, IIRC, linking the front panel to he backplane)... all of the other cards are connected via card

Heath this pretty much describes the problem I was having with TSW 750 s. All I did was put in an unmanaged poe switch and it seems to cure the problem. Maybe this will help you for this issue as

Is that definitely the problem with this issue? I just got a unit repaired by Crestron and lo and behold when he came back this is happening right out of the box . I suppose if this is the case I can

Have a CP3 with five EX gateways on it. Last night, all five of them went off line - in the sense that IPT shows offline but I can still console in. The CEN-TRACK also went with them. DM, SWAMPs and

will this work for you? <http://www.globalcache.com/products/itach/wf2slspecs/>

OT: Anyone have any experience using wireless RS-232 equipment. I have some old Lutron Homeworks equipment that needs modification routinely, but unfortunately, is not in the room where the lights

Ipt -p:ALL -c Have you try that {Paf} Le 9 mai 2013 23:01, "Chen Zhihao" <bobbylken@...> a 閏rit : [Non-text portions of this message have been removed]

I haven't tried it, but a RESTORE at the console might do the trick.