I will get another shot at it today in the afternoon. I will try all your solutions.
To be honest I am not sure how old the AV2 actually is.
I will keep you guys posted on my findings.
Thanks once again.
toggle quoted message
Show quoted text
--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:
I am with you. How old is the av2. Can you load the program to another 2series and it will run?
--- In Crestron@..., jason santlofer <jason@> wrote:
How old is the av2?
Sent from my Verizon Wireless 4G LTE DROID
Rapha??l Thiffault <raphaelthiffault@> wrote:
Have you try this:
Erase actual program
Upload a blank program
Disconnect ethernet
Disconnect crestnet
Trying an external power supply
{Paf}
Le 9 mai 2013 17:14, "coolaiddrinker" <coolaiddrinker@> a ???crit :
**
Thanks for all replies. Sorry just got a chance again to play with this
upgrade. I have following SW & FW VERs in the system
AV2: 4.007.0004
IMPL Windows: 4.02.08
SIMPL+ 4.02.07
Path: C:\Program Files\Crestron\Simpl
INCLUDE4_2SERIES.DAT Version Information:
(2 Series) : 1.79
INCLUDE4.DAT Version Information:
(3 Series) : 1.14.017
Data Files:
Path: C:\Program Files\Crestron\Cresdb\Programming
symlib.tio 855 03/07/2013 05:34:02PM
iodev.tio 855 03/07/2013 05:34:02PM
Other Crestron SW:
Device Database: 48.05.005.00
Crestron Database: 38.00.006.00
Crestron Toolbox: 2.35.239.03
SIMPL+ Cross Compiler: 1.3
I have initialized the processor, re-flashed the firmware but the issue
still pertains. Anything you guys see wrong with these firmware versions or
any other possibilities?
TIA
--- In Crestron@..., "h" <web1111a@> wrote:
Actually,
There was a database release that had an include.dat that caused 3.155
firmware to continually reboot
Harvey
--- In Crestron@..., "Chip" <cfm@> wrote:
D'oh - you're right...
- Chip
--- In Crestron@..., "Ted" <ted_brincka@> wrote:
Actually, it's the reverse. If you update the firmware without
recompiling the program with the newer databases then you get the problem.
--- In Crestron@..., "Chip" <cfm@> wrote:
Any chance the firmware in the unit is kinda on the old side? A
few database versions back I found that newly compiled programs would stop
working in processors they had been fine in until the firmware got uppped.
- Chip
--- In Crestron@..., "coolaiddrinker" <coolaiddrinker@>
wrote:
Hi Guys,
When I load new program in the processor, it keeps rebooting. I
can get it back by bypassing the program and reloading the old one.
Any clue what should I be looking for in the program that may
cause this? I only Biamp and Tandberg Modules in the program. rest are just
buffers so I can run non core 3 on tp and test core 3 on xpanel and provide
feedback to smart objects..
TIA
[Non-text portions of this message have been removed]
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
[Non-text portions of this message have been removed]
