开云体育

Seems like I will find my self in deep waters in my next project were I have 4 TWS-1050. Anyone can point a list of Do practicees before we go and plug this things. Maybe like: Working POE Switch? CAT

Based on those addresses your likely in a /24 network. In such a case all three of the first sets of octets in the IP address must match. A device at 192.168.0.x cannot communicate with a device at

Correct. The sonnex does not get a dedicated ecross. Its signals get connected (appropriately) to each audio zone ecross for whatever you want accessible to the interface or manipulated by the

as promised.... so my sonnex would get its signals from the kitchen ecross directly? No ecross for the sonnex, is that correct? This would give the xpanel a simultaneous connection for volume and also

My IP address of aads is 192.168.1.74 and my idoc address is 192.168.0.4 What do I need to make the idoc ip to make it discoverable to aads Thanks

Thanks I think I have the basic layout. You probably will be hearing from me again.

Last few weeks I've had 3x RMAs on HD-EXT-1C transmitters for corrosion on the RJ45 output port after just under 2 years in service. Now I just took possession of a DM-RMC-SCALER-C that was acting not

To test the streaming video or mpjeg of your TSW panels. Do you have a internet feed you use, a stream off the web. Something to test your panels against when deploying security. Don't currently have

Yes but I am trying to not use the media player application. Not real pleased with how it looks or works. Need way to do this with regular lists, gesture canvas.

I am having issues where I am using a button that is checked "show control feedback" because I am using an il to drive the fb. Most of the time the fb on the button does not show until I press and

Put a gesture canvas next to the list with arrows indicating a gesture area? I don't think that will help you as there's no way to seed the list on the media player application from an external input

There should be two layers of crosspoints. One is between the interface (xpanel) and the audio zone (kitchen). This is driven by audio zone selection. The next layer is from the audio zone to the

You could create multiple xpoint in the system. One for Zone select/volume and the other for equipment control

What version? Sent from my Verizon Wireless 4G LTE DROID "m.nguyen" <mpninc@...> wrote:

I have the beta firmware it for the MC3 seem to fix it.

Let me start by giving Neil much love for the crosspoint flow charts. I finally feel ready to tackle the topic. Scenario- xpanel turn on the kitchen audio zone and control the Mirage server. My

Oh wow, cool - sorry - I missed that - yes there's certainly some good options there, Cheers!

From what pakedge explained to me the panels (maybe due to the amount of them) was causing a network storm and crashing the switch. I replaced the managed switch with an unmanaged unit and Im just

HP Procurve 2520, I think. It's not the switches, although its odd that you have had to reboot your switch. I don't think I've ever had to reboot any of these switches. The problem was traced down to