开云体育

Sometimes the person who check the product at crestron forgot to reinitialize device. {Paf} Le 22 mars 2013 08:40, "jcdigitalmethod" <j.j.cunningham@...> a 閏rit : [Non-text portions of this

Guys I might need to venture into this series, but as we all know their C3 only. I just created a test project, (i dont have a unit with me). and downloaded the Conference room example. Just trying to

Any of the ADA ptm series amps. PTM-850 is 1 space 8 channel tank, stable down to 2 ohms if you dare.

Yeah, that sounds easy enough... :-)

AudioControl amplifiers. They're not the cheapest, but they are small (3U), relatively cool, rock-solid*, and powerful. They can withstand some serious abuse, including multiple 2-ohm loads on a

I've seen it several times over the years. Early QM stuff mostly and qmrmcs coming in eslave mode etc.

Interesting. Did you charge the battery fully first, and then try to power it from battery? I had 2 batteries refurbed by batteryfill.com with great success, although it took 2-3 charge cycles for the

Just opened a new DMPS-300-C and found a program already loaded on it. Anyone else see this? 2nd one I've seen like this in a year. Are they taking refurbed boards and throw them in new chassis? I

I am not 100% certain on this, but am pretty sure that the query command is "?OUTPUT,1&#92;n". The Action number is only for actual commands: For example, Action 1 is set output level

Hi, I love using Crestron Sonnex, but for some projects it is just to expensive. The AAE's aren't bad, but sometimes they are "too light" for some projects. What do the rest of you use if you require

In the QS protocol you are specifying the command, the integration ID of the device you want to control, and the action you want the device to perform. Some actions also have optional parameters that

If you can connect to toolbox, have you try the file manager option. Extract all the gui folder and send it to the remote. I have done that in the past for some panel but not sure if it's works on

Submitting that problem to crestron to get a fix on next release will be the best solution. {Paf} Le 21 mars 2013 23:00, "jaaronart" <jaaron7@...> a 閏rit :

Its been few months and I continue to have issues. I have the latest released databases. The freezing happens even when I am not connected to a processor. As long as I am working on a project that has

I didn't notice your response Henry (been very busy), but I came back here to update the thread with some new information. All my panels are on Ethernet. I disabled cresnet (out of pure desperation),

I am glad to get kind reply from you. OK,,, i will try with "?OUTPUT,ALL_DEVICES,1" Do you know what's the meaning of the last "1" According to the manual, it says "Action Number" I can't

Hello All, I was wondering if someone who had already worked with the PTZ IP Camera with ONVIF protocol. could you please guide me with the how to control the camera from the touch panel. I am Able to

No thanks needed brother as it was honest and from the heart. JRW

Hi all, I have a client that we don't have the code for that ruined their PTX3 remote. I think I can still connect with toolbox, but is there a way to get the compiled file out of it to load to a new

Thanks.