开云体育

You may be able to find something here that will work. http://www.freesound.org/ Andy Sent: Monday, April 23, 2012 11:28 AM To: Crestron@... Subject: [Crestron] Door chime? ? Anyone have

Anyone have a door chime they would be willing to share? I've done it before with the "armed/disarmed", but I figure I'd ask here before hunting the net. I'm looking for a chime to go off from my

I posted a set of five free icons from our Avant set on our website (link below). We just added 50 new icons (set has 125 total) that reflect many of your requests. We feel these are the best icons in

Does anyone have an IR file for a HikVision Securtiy Camera DVR they can share with me. I'm working on a remote system and don't have the remote. I can have it sent to me but hey, if someone already

That's funny. I've been training my gf as well. She knows the difference between simpl windows and vt pro she doesn't get the logic yet but she understands symbols and cross points. She heard me

Exactly, that's how I use them. I also use what I call parallel crosspoints where one set is for rooms, another for equipment, another for HVAC and another for Lighting. It's a little more

You could always teach the wife to fix it :) Very early in my relationship with my girlfriend she learned what SIMPLWindows was and basic digital logic (she wanted to know what I did all day so...)

Thanks for the replies. I'm using SB. I tried using inputs 1-4 but it didn't work. I'm using the cresnet bus to power the devices. I know the programming is good, because if I short manually the

I know D3 allows a generic digital input (look under devices). Tie that to the AES digital input and it should work. Make sure you have a power supply for the sensor. Typically, the GLS-SIM provides

AES has inputs 1-4, those will work for what you want. I do not know if the AES in SB will let you input it though.

There is a space between ky and the command, then a period between the command and the function. Then a character return (\r) after each command. Power OFF = ky pow.off Power ON = ky pow.on Input

Hi all, I have a client with a AES (programmed in SB). He now wants to add motion sensors. My question to you is : Will the GLS-OIR-C-450 work with the AES? The AES doesn't have versiports and the

I posted a module for the LS-3/5 in the files section a few years back. Try that.

Hi All Im on site and trying to get this projector to work The manual gives me an example of ky <keyname>[CR] ky for key commands or op for operation commands so im sending POWOFF&#92;x0a&#92;x0d i

That's why a lot of use multiple crosspoint connect symbols, normally one for each touch panel, that way you just leave the panel connect and change equipment. Although, disconnect all disconnects

Thanks Tray! Erik, it's for an aquaculture investigation center.

This wasn't the virtual cell system that they sell, but a micro cell system? I didn't realize they had a microcell system with a controller available. Or maybe I'm confused as to how the virtual cell

The real lesson to be learned here is: Don't learn crosspoints on anything that your wife might be using! Better yet, don't develop anything on it. ;-) (I always do changes on a secondary room and

Sounds like you are programming for an "enhanced" interrogation area - keep them terrorists of kilter with weird light schedules.

I have the radio shack one and the keyspan. I like the keyspan more, but the radio shack one comes with a 6 foot cord and can mate directly to most devices, which makes it ideal for most setups when