开云体育

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Heath Volmer
Sent: Monday, April 23, 2012 10:29 AM
To: Crestron@...
Subject: Re: [Crestron] Cross Point connected to multiple Equipment

The real lesson to be learned here is: Don't learn crosspoints on anything
that your wife might be using! Better yet, don't develop anything on it.
;-)

(I always do changes on a secondary room and when I'm convinced that the
new stuff won't get me an angry wife-call in the middle of the work day,
I'll load it to the other rooms. Been there.)

On Sun, Apr 22, 2012 at 7:46 PM, timfauser <tsfauser@...> wrote:

**


Trying to get a better grasp on cross points by testing on my home system
(fyi, wife is annoyed).

I have my equipment connection routing going into a Serial/ Analog One
Shot that has disconnect running running on the out and connect on the out*.

Somehow when I connect to Equipment crosspoint 101d, and press join 45 on
Control crosspoint 1d, I see the signal come out Equipment cross point 100d
(was connected to) AND 101d. If I reboot the processor it will only come
out the first I connect to, but it never seems to loose connection when I
try to move to a different piece of gear.

How is this possible, and what am I missing. Quickly my wife is looking
for the granite rolling pin.

Thanks
Tim F

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links