开云体育

That's why a lot of use multiple crosspoint connect symbols, normally one for each touch panel, that way you just leave the panel connect and change equipment. Although, disconnect all disconnects

Thanks Tray! Erik, it's for an aquaculture investigation center.

This wasn't the virtual cell system that they sell, but a micro cell system? I didn't realize they had a microcell system with a controller available. Or maybe I'm confused as to how the virtual cell

The real lesson to be learned here is: Don't learn crosspoints on anything that your wife might be using! Better yet, don't develop anything on it. ;-) (I always do changes on a secondary room and

Sounds like you are programming for an "enhanced" interrogation area - keep them terrorists of kilter with weird light schedules.

I have the radio shack one and the keyspan. I like the keyspan more, but the radio shack one comes with a 6 foot cord and can mate directly to most devices, which makes it ideal for most setups when

Have been using Tripp Lite Keyspan unit http://www.amazon.com/gp/product/B0000VYJRY/ref=oh_details_o04_s00_i00 with a Dell Precision M4400. work with the CNXLIR Learner? I have a new HP desktop and

I've put in a Pakedge microcell network with 3 waps (not a huge system, I'll admit), but it's incredibly stable. I can download a file continuously while walking from corner to corner of the place

Yes, use S+ to modify the TOD string sent to any room not using local time/date. I’ve done this and it works great. Tray == Sent: Monday, April 23, 2012 7:39 AM To: Crestron@... Subject:

use smcFanControl on the mac and crank the fans up to get rid of the heat. run "Repair Disk Permissions" using Disk Utility on the mac, you would be surprised at the weird problems that will fix.

I was about to call hogwash on that, but as it turns out, my disconnect_all actually connects to DiscFromC. I find that one very handy, and probably the one he wants. I find that much easier than

I am setting up the network on a system I'm about to upload to. Running through the devices when discovering, it pulls up an error for the C2N-TFM. It says "Unsupported Device". It will let me keep

I've you set the dns server on your processor?

Hi! I'm programming a system that has some special needs. User need to be able to simulate light scenarios of different GPS positions and dates. User must be able to configure the conditions: -GPS

http://www.globalcache.com/support/crestron-template/

Trying mail.com setup as below, with my account. but get error -3 Do I have to get a Pro account? Not just the free version? If i need to change port, is it possible with this module? Regards Joel

Hi All I don't suppose anyone would have a module for a Global Cache device, or could point me in the right direction to read up on integrating the 6 port IR version into a Crestron system. Never used

Your welcome. I think almost everyone in the group has gone through that problem(or similar). Also, the InUse signal does not always stay high, it has a tendency to go low for a couple of waves(at

I was working on one last Friday and spent two hours on tech support with Polycom. The bottom line is that I ran into the EXACT same problem you did. I didn't have any luck and I used both the

Bumping an old topic, but wanted to see how your experience has been if you are still using them with the Insteon products. I have a number of residential properties which clamor for some lighting