开云体育

Tony, I've not used this Intesis but have used a Procon IP32 Modbus Interface connected to a G50. That way the A/C system can still be operated from the G50 if there's any problems with the Intesis or

Thank you both Matt and Chip Moody. I should have mentioned that I have no problem talking to the router via RS-232 from a PC. I'm using a straight trough cable from the AV2 to the Sierra. Same kind

There are web versions of yahoo messenger and the AIM client. http://webmessenger.yahoo.com/ and http://www.aim.com/aimexpress.adp You could give them a try.

CEN-COM was indeed during the first generation of equipment - X Generation. You may wish to stick it behind a router to cut traffic that the thing is seeing, they really didn't handle even moderate

The CEN-COM was after and before my time, it came and went while I was on a brief hiatus from this industry so I was never up on the specs. They pretty much killed it when the QM-RMC came out. It

Mark, It's on a 10/100 switch; but since (AFAIK) all of the early CEN-stuff was limited to 10/Half you may have a good point. The SHOW INTERFACES STATUS from the switch (Cisco Catalyst 2920) shows

Lincoln, 2 Things come to mind. Are you running it on a gig switch? And do you have it set to auto-negotiate? Try setting it to 100/Full or 10/Full, I've seen similar issues like this with other

I recently pulled a CEN-COM off my "shelf-o-random-Crestron stuff" to use for with the serial interface for my alarm panel (with the eventual idea being to put it on its own processor) Anyway I've

I've used both the Advent and the Concord. I really haven't tried too much with keypad emulation, just real-time feedback. There was a problem with the GE modules for the Advent a while back, where

I'm not fond of the Ademcos. Even the HAI is better. Overall, I still like the GE Advent the best - it gives the best emulation of the physical system keypad. The GE NetWorx is genenerally good too,

HAI Omni Pro II, works beautifully Mark Day's iPhone !deabox Media Group T: +1 (702) 332-3156 E:mark@... <jamesclaflin@...> wrote:

I've fucking had it with this 128FBP. I just spent all weekend just trying to get reliable keyypad emulation feedback to no avail. The panel does work great with no motions or door contacts hooked up

That should be a cool project. Let us know how it turns out. I wish I had a couple of fists full of hair to pull out...

i have learned the remote of life size express ,but none of the button seems to be working at all, can somebody help me in this regards or somebody out there has a ir file of lifesize and want to

One way to do it may be to send a "PROGCOMMENTS" command to the console, parse the return for the info you want and send that out to Roomview ... :Dean <dedicatedsystems@...> wrote: a

i would like to be able to see the current program that is loaded in a processor on my roomveiw for my client. That way if i have to have him load a file in the future i can ask him to tell me the

wrote: You might try just using ICQ2G0 in an IE browser, should work.

I do know that it has skype on it and I have used that for people and it works well.

Anyone know if instant messaging from a TPMC-8X is possible (AIM, Yahoo, etc.)? TIA

Hey Dean (this is a bit wierd ;) I'm working on a project with an XR500 also ... I downloaded and disected the Crestron XR200 module but I also get in touch with DMP before I got near the site to see