开云体育

I have tested this module, but unfortunately, it does not work with the Televic D-Cerno CUR system

I don't have access to the RMC3 where the TCP/IP Server resides. It was programmed by 3rd party but we are now working with them to make changes.

I don't have access to the RMC3, this is controlled by 3rd party and they gave the parameters for accessing the control. But I have numerous processors around building that need to access this RMC3

Thanks!? I will look into that!? What thickness did you use?

You could do a subnet broadcast FROM the RMC3 that has the data you want to populate to all the other devices.

Any reason that you can't have multiple Servers on different ports to handle your different clients? [email protected]> wrote:

I believe one of the ones that keeps freezing is on the latest fw, and the other one that freezes as well as the rest of them are all on the fw just previous to the current. What strikes me as odd is

That is what I thought. I'll need to contact 3rd party who programmed the RMC3 that we are interfacing with.

We did one the other day in a custom lectern. Used a black acrylic sheet to mount in the old opening and provide a mounting hole for the new TP. Looked great. Find a local fabricator who can laser

I have a project with many TPS-3000L that we are upgrading to TSW-1070.? ?With the age of the 3000 panel there is not a retrofit mounting bracket from Crestron.? Also the size of the 3000 rough

Are you on the latest firmware? I have had 2-3 NVX units on campus running the latest firmware that appearently just stopped working, they are online with the processor etc. Kind of "lights are on

Not with a Normal TCP server symbol, but should be doable with a C# server socket.

Is there a workaround for the limitation of a single connection at time to a TCP/IP Server located on a RMC3 that can be accessed by several other processors? Example Processor A enables connection to

Possibly, I have multicast blocked on the port that goes out to the network so there are no interruptions network-side. It just seems that the decoder randomly stops talking to the CP4 for whatever

Thank you, I'll give that a go. It's a pain in the neck to swap them physically but I don't really have an option at this point lol. I've tried just about everything I can think of -- Stephen

Try physically and programmatically swapping the troublesome NVX with the one next to it that is working fine (IP ID, cable, drop, position in DIR-80, everything). If the problem follows the NVX in

Could this be an issue with multicasting?? We have an issue here where the network ports we are using are going through a different switch than the Xio.? This caused a massive network block and the

Hello everyone, I currently have 2 video walls side-by-side at a site where we are using all DM-NVX devices. Processor is a CP4, using a DIR-80, and everything is connected with an Aruba 6100 48 port

I worked on a system with a couple of them last year, and they seemed to work fine.

Yes, I'm aware, and that's still an issue. I gave them the pros and cons, but it wasn't my decision. Of course, I still get paid to change it - and to change it back, if it comes to that ?