开云体育

Yes. Have seen the exact same behavior. I don't know the cause though. I usually do an INITIALIZE at that point. Not really sure if that is helping, but it doesn't seem to happen for a while then. Or

Unless you are using Crestron Home, the TSR-310s do not need to be on the same subnet/vlan as the Crestron processor.? The TSR310 doesn't do airplay or streaming. Off topic, you can play airplay to

Alternatively, look at the AprilAire S86WUMPR Tstats. I'm just getting ready to deploy these on a site because the HVAC guy wanted something he was familiar with for service. ControlWorks has a module

Kind of a side note, but I'm running a separate AV Vlan in a residence, how do you manage audio streaming and airplay? Don't those endpoints needs to be in both VLANS?

Looks like I will be buying a new HZ-THSTAT for my new home. Thanks for the input. Cheers

Hi, really interesting discussion… I want to add my experience, especially because I had one two days ago. In all systems there is a Crestron own SSID with 2.4 GHz which leads into the Crestron

Hi All, I have noticed this behavior over the last 4-6 months. The condition seems to happen only once every 4-10 program loads with CP4 (typically the only 4-series I use)... - Load updated program

I'm actually looking to eliminate it as I no longer use MyCrestron... And CloudClient is disabled. I'm looking to turn it all off. Its not a big deal, but like CloudClient I don't want anything

I have had cases where MyCrestron Registration failed.?? I don't remember all the details but the fix was use a different Domain name.? Also, don't forget to reboot the processor as I don't think

Text console mycrestron domainname password

Don't know about CRPC issues because I don't use it on the TSR310.? But I wouldn't think it would be an issue as that would probably mean Crestron Go CRPC would not work too if you are on a different

I've been buried with other more important issues and haven't had any time to sort this out.? The monitor I'm using for this test is a actual 1080P computer monitor with no internal speakers.? I do

Hi All, So I have a project that we just updated last month with an existing CP3 (probably 7+ years old). I'm noticing this in the error logs every few days, and I'm thinking that this is an old

on first glance, it looks like the login needs an OAuth token, which is tricky and can only be done in SIMPL#, which is why there is a Home Driver. Someone could make a driver for SIMPL, but I'm

There probably needs to be a longer delay between each command. As someone else mentioned, modifying the IR driver might also help.

Eventually, but it still wasn't working, so after a TB phone call we set up something that did the trick, even though it took 7 symbols to do it the way that I needed it. We did end up tying it to the

Xfinity cable box. in Debugger I will see IR pulses for 1,0,0,3 but actually what happens is 1,0,0,0,3 at the device.

Thanks, Michael and Steve, This is a very interesting discussion! I hope we will be able to refine what we should be doing... Michael, I hadn't thought about the fact of the 'null' condition (TSRs

You didn't tie it to the feedback for the page on the touch panel definition? [email protected]> wrote:

i am also keen and trying to get Hisense to do an iP driver. Keen to see if this gets any traction. Ben Clay http://www.autm8.com.au/ ? ?mailto:ben@... ? ?http://www.autm8.com.au/