开云体育

Hello, I have here my touchpanell TSW 770 B-S with firmware version 2.004.1079. I am able to sent my GUI project to the panel but everytime it reboots it enters crestron default mode. I cannot force

I have a D3Pro program with lots of Horizon keypads.? Once I get the Behavior Properties "just right" on one keypad, it would be nice to simply copy those settings to other keypads.? Does anyone

Hi, thank you for your reply I login into webinterface and configure network to specific ip adress, slave mode is off. Right now I am starting from begining to create a program (installation is not

I’m coding for one of these right now (awaiting actual unit), so this caught my attention. Have you logged into its web browser and configured it or checked its settings? See this

Hi, I never worked with the NAX-AUD-USB, just a rough guess: Are you sending a single AES channel to the NAX-AUD-USB? If so, try sending two channels. Best regards Crestronfreak55

Have you tried using it with a completely different multicast address range?

Having an odd issue and both Crestron and QSC haven't been much help. I have 16 AES67 streams coming from a Crestron NAZ-4ZSP that are going into a QSYS Core 110F. All of those are running fine.

Well, I finally tried that, but it didn't seem to matter. Thanks, though! jim

I don't have any answers as I won't support the HOME platform (for these and other reasons), but if you reach out to me directly, I may be able to get you hooked up with someone at Crestron that can

Many smart home products are designed for people that live in single family homes as they require replacing existing things in the home or making other modifications to the property.? Products like

Anyone please?

Thanks This isn't the first time that there has been an issue with Crestron's providing weather data. I realize that changing over to a WeatherFlow tempest would be a significant undertaking for

Thanks Jay! Yes going forward I think this might be a good solution, however: a. Crestron should fix their shit! b. To migrate to your solution would be a major undertaking - i.e adding hardware and a

In my experience, LG's implementation of Crestron Connected has been at best limited. Early implementations were RoomView Connected, required WOL to turn them on and did NOT implement volume control

Yes but thanks anyway.? You pointed me in the right direction.

Woops.? You are correct.? I looked at my garage door beam sensor signals which isn't actually a dry contact.? No PU disable required as you have discovered!

Well almost perfectly. Putting a 1 on all the PU disables held them all high.? Swapped them all out for 0's and now it's working as wished.

I was on the same boat few years ago with LM35. This sensor has too wide temperature range, so an Operational amplifier in series is needed. I made a working prototype that time and it somehow worked.

Just a suggestion, WeatherFlow Tempest smart weather system is a really nice wy of delivering weather conditions and forecast information. You also get local notifications from the Tempest for rain

Yes I'd like to remove them however many clients really like the features, particularly the 5-day. It just sux that Crestron cannot keep these things going... Eventually we'll be forced to delete all