开云体育

FYI, there are a couple of third-party Debugger alternatives that I've heard work fairly well. I haven't personally used them, and can't remember the names at the moment, but maybe someone else will

Part of it is by default the 4 series will automatically log you out after 20 minutes of "inactivity" but the activity counter seems to only be reset on traffic from you to the processor -- the

It used to work for me.? In the past I have run debugger all night on a customer's system to catch a weird event that randomly took place.? However, I fully admit that I don't remember which

Only once or twice in all these years I have been able to get debugger to run for more than a handful of hours. Probably was a 2-series. On these 3 and especially 4 series even with the idle time set

You do need to enable the API (I forget what ys labeled in the menu..."network remote" or something along those lines) on each device you want to control, including the minis. From there just point

I've controlled several Tivo Minis on various projects using the ethernet module. However, the technicians always took care of configuring the boxes. I suspect there's a setting somewhere to enable

My latest article is the second in a three part series on the resilient smart home.? The first article focused on making the smart home systems in a home resilient to natural disasters, and other

I have SETLOGOFFIDLETIME set to infinte on my CP4 so I can run SimplDebugger for extended periods of time to capture spurious issues when I'm debugging driver code.? Unfortunately, my experience is

Slip, I bet the SystemInfo issue you are having is related to the hardening of the processor. ?This command "SETLOGOFFIDLETIME" defaults to 20 minutes IIRC but can be changed. ?If you have text

I have a Tivi DVr and 4 TiVo minis, I am using the TiVo 3 series module and can connect to the main DvR unit via the Ip and control the unit. The same module will not connect to the ip addresses of

Yes, "check for update" is enabled in the ipad IOS settings for all the panels. And the panels are being updated. The ones in question just don't see the logic ie the new ir file. They see graphic

In the main iPad iOS settings if you scroll down to Crestron Mobile Pro G is "Check For Update" enabled? If not then it wont pull the new UI update it will keep using the old one.

It's not available. Already been through this with Lutron. You have to use the modules provided by Control Concepts. So

Hi. Is it possible to control the sensitivity of the knob in an MPC3-302? OOTB it's giving me a resolution of 5,461d, meaning it takes only 12 steps to go from 0d to 65,535d, which is unacceptable if

Hi All, Anyone has access to the new Lutron LEAP API? I do not have a Lutron account.

Always slot 1 for me in multi-slot systems. The system info tool takes forever to populate, quite often hanging at 30 or 50%. EDIT: Also, another thing that is different to 3-series - If I open system

Sometimes it is easier to troubleshoot with multiple user interfaces if you use unique signal names on the touch panel and ipad definitions, such as TP01 Projector Power, TP02 Projector Power, iPad01

The buttons are joined directly to the ir driver for the new projector. None of the ipad symbols in simpl use any buffers. The ir commands now work in the new panels. There was an issue with the user

Which is really stupid as they really should be setting these for User Project once they leave the factory. Especially since they have a dedicated -R version of these just for CH. Which is also

I'm having the issue with the latest release at a site I was at last week.? I have 3 slots in use and the issue only seems to happen with Slot-01 for me.? I don't know if t hat is because it is the