开云体育

could agree more the "brain trust" still charges for an app oh and you can't even download it GREAT play... join 2024 and give the app away it's worthless without tens of thousands of dollars of

It's fucking insane that it takes literally YEARS for Crestron to get this out. Hell, even Savant,an Apple based system has a working Android app.

I just had another client ask me about this yesterday. Not to mention my own phone (Pixel 8 Pro), and my wife's....

On the panels at issue, when I depress the new buttons, they do not engage ie active inactive,? so in Debugger, the signals do not show up. With the panels that work, Debugger shows the signals in

2024/2025 or ....?

I recommend you use Simpl Debugger to see what is happening when you press the buttons in the iPads that are not working as you are expecting. My guess is that there are some issues with the code. If

Thanks but the ipads are receiving the new updated graphics programs. And yes I have to load each one directly but thats ok. The problem is that the two in question are not recognizing the updated

FTR, Use Local file=ON means that you have to load the graphics file directly to each iPad. if one/more still have the old project (i.e. not the new project) you'll see what you're experiencing. If

I actually recently did this... In short, the CresNet buss isn't shared all the way through,? so I used the existing 300wPs, for a connection to one port on each row. Below are my notes from the work

The Use Local File is set to on in all four panels. By changing any of them to off, the program will not run. So must be something else. Thanks for the suggestion though.

Make sure the Use Local File is set to off , in the crestron mobile app of those two ipads

Dustin, This looks incredibly promising, thank you for sharing! I have also initiated a feature request with Renewed Vision for the ability to send arbitrary strings to a TCP/IP device which was not

Have a? 2 series processor (MP2E) and multiple Ipads. The ipads all have the same VT program in them but when I added in a projector (IR Commands) to simpl, the two ipad mini panels do not "see" the

I second replacing it with a couple of DIN-HUBs and DIN-PWS-60's. This is where I find the restrictions on the DIN-CEN-CN's terribly unfortunate.? It makes them almost completely useless for a

The PAC2 had a built in Cresnet Hub (CNX-HUB equivalent) – I would probably recommend getting the PAC2 out of the equation as a point of failure and replacing it with a DIN-HUB or CNX-HUB) but if

Hi Bruce, I have a couple of PAC2's I'm considering the best path on as well -- I am convinced that those 8 Cresnet busses (A thru H) are electrically isolated from one another, and the processor

If I'm understanding what you are asking, you could just use a CNTBLOCK with the internal power jumper cut. That would isolate power between the two sides but still let cresnet data pass between the

I will be updating an ancient system with a PAC2 and CLX dimmers and CNX-BXX keypads to Crestron Home in a few weeks. There's a load of the field Cresnet wires landed right on the PAC2 on its many

Im able to do this manually. I was wondering if anybody had a way to accomplish this in Crestron Home. Thanks

Don't know about CHome, but to do it manually: Enable AES67 on the Dante device in Dante Controller Create AES67 mcast transmiter (must be 2 channels) thru DC and take note of the mcast IP Enter the