The buttons are joined directly to the ir driver for the new projector. None of the ipad symbols in simpl use any buffers. The ir commands now work in the new panels. There was an issue with the user database that I corrected which is why it ir file would not work previously.? However, with the same vt program loaded into the ipad minis, and no change to the logic in the processor, the ipad minis, while updating all changes, will not recognize the joins in debugger or in the panels. There are buffers in the program but they are used for older touchpanels and not ipads. As well, I tried loading the program on my phone and again, while updating all the graphics etc, it is acting like the ipad minis. If I use the old ir Epson projector file, all the panels work fine but that doesn't tell me what is going on with the new file moreover there are commands on the new remote that are not in the old ir file that I need. So it seems like there is a problem in getting the ipad minis ( and now phones) to recognize the new logic from the new ir file. There is something I am overlooking.
