开云体育

Never done push notifications with Crestron so which platform works the best?

Perfect.? Thank you.

You may have to go into Edit -> Preferences -> Program Editing and tick the Symbol Set: SPECIAL box. Alternately you can go to View -> Limited Symbol Mode (off) (this is how you want it to display).

Just an update on my system: CP4-Integration, AP4-D3 Lighting, (2) GWEXERs w/?v1.4469.00011 FW Both of the GWs, although 'new' apparently were old enough that they needed FW updates to that level so

Right click on the parent slot of the serial port (not the serial port itself) and add it as a device extender. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems

To use, supply the module with the path to the library file. The driver will provide the default baud rate and other communication settings to the program through the <PacketTx> signal. This must be

Create an AINCF for each mode you want, most cases Heat and Cool (Auto as well if using Single Setpoint, best to just skip whatever junk logic is in that module).? Set the increment to 10, lower and

1. The Projector is situated above the last row of seats in the Theater Room a. Noise Levels are, indeed, a distraction We are all familiar with the concept that “You Gets what you Pay For”. That

Two other points to consider in the choice of projector: If the projector is located within the theater, especially if it is over the seating area, the fan noise is a biggie.? I believe Sony in

CrestronGo is not as resilient as the old app was... one thing I noticed is that it won't reconnect back to the control system as easily if the connection is lost after an upload or after a brief WiFi

Geoff, Your comments are very well-reasoned AND appreciated. I kinda-sorta knew (in advance) that my earlier comments might cause some blowback. Do note that I view all of this as a medical issue and

Would anyone have an example program to share for the DIN-THSTAT? We too are having trouble with the logic on the Analog inputs for the Single Setpoint increment/decrements.

HI, Yes....We have seen this behavior on a number of recent installations using the App on iPads.? ? It just seems to lose the plot and a force close and restart makes it work again.? ? ?Not seen

While I agree it’s nice to bring the human element into the forum from time to time, Let’s be REALLY careful to not turn this conversation into a political argument. So I’d strongly suggest we

No worries, Michael – was just a bit surprised. In terms of your recent vaccine program, you?re definitely doing better than we are. This is going really slooow over here… We?re also really

Thorsten, I was not attempting to “ding” anyone or country but rather what I’ve heard from Molly and others on your side of the pond. Frankly, our most recent progress is largely due to the new

So for a $8.5 million house, i?d definitely expect a reasonable budget for a home theater room. I would start thinking less than 6-digits in that case. But without a budget, it?s pretty pointless to

It is a massive undertaking. All provisioned for Component Video but fortunately with CAT 5 cable at most/all TV Display locations. Again, Kaleidescape has a nice promotion going on so I would tend to

Sounds like a nice project. Would be a shame not to take the advantage and just replace the projector instead of a full redesign. ? The MSRP of the RS900DPL was around $9.000,- >10 years ago.

Me Too! I have not been presented with or informed about any budget requirements. That said, the house was recently purchased (out of bankruptcy) for $8.5 million in less than three days on the