开云体育

Working for me as well...

Working for me. Daily.

Still getting my daily emails, FYI.

I think I have had a total of 2 CP3s over the years where all the relays just stopped working.? None on the AV3/PRO3 although we haven't sold near as many of those.? So over the 10 years or so that

What is the onboard USB in your example? Thanks!

I’ve abused relays on 3-series processors (including doing stupid things like clicking one every ? second for a couple hours just because) and I fairly frequently find myself having to use a ?

Hello, Currently upgrading an old PRO2 system, TV's Will be upgraded shortly as well but for now it is still NUVISION. I am unable to talk to the TV and only get error responses back.? Commands are

Hi Scott I think you have IGMP v2 enabled. And thus unregistered multicast addresses are not available to the AP. You have to manually add these Dante multicast addresses to the group addresses and

How often are you experiencing relay port failures on 3 series processors?? I am seeing an unacceptable number of high failures with these especially when it is a regularly used relay such as for a

Anyone else not get any group digest emails for the last week or so?

I could be way off, but is it possible the AP has a spanning tree setting causing this? Are you still able to connect to the QSYS devices is you add a hard-link? Just no discovery?

Update from ATSG: This is a known issue that will be addressed in the 4.9.x Microsoft Teams rooms build

Depends on your microphones. Currently we are seeing a lot of use with the Tesira X series. We add a EX-USB for the BYOD systems and use the onboard USB for the UC Engine

Hi all, just need a little help. Has anyone successfully setup an NVX/Dante network and also managed to get Dante Controller working reliably via a wireless AP? My system uses a Cisco SG350 and I have

We?re using a Miele dishwasher and washing machine at home. Up to now, they are notifying via app that they are finished which is useful. It has a REST API to interface with 3d party systems – I

Has anyone had any luck with this module recalling cable channel presets?? I have tried both using the parameters at the bottom and then pulsing the preset number and then using an sio (with \x0A as

Look through the Extreme X440-G2 series to see if there is a model with the port counts you need.? Very little to no configuration needed if you're just using a single switch with NVX.

It depends on how many of each you’re working with. I’d start looking at the Catalyst 9500 series and it’s real easy to do up to 48 copper ports and 8 fiber (using a C9500-NM-8X/C9300-NM-8M

Let me just add one other thing.? Using energy monitors to tell you when an appliance is done is not as simple as it would at first seem.? First of all, appliances all use some power 24x7.? On top

Hi John, My personal preference would be the QSC Core 110f or the new smaller Flex DSP, if this caters for the number of inputs required. Provides all the features and can easily be integrated with