开云体育

What specific issue are you having with Dante? Discovery? Dropouts? Clocking? if it’s discovery then you likely have an issue with broadcast traffic or your controller PC is on a different VLAN. if

Has anyone experienced network issues with the DMPS3-4K-100-C? If I disconnect the network cable then reconnect, I don't get network activity but if I disconnect a second time and reconnect it appears

Don't you think it's a little early to be drinking? Or am I late to the party? With no InfoComm, my body is a little confused right now.

Anyone have a module or has worked with these units ?

Maybe you need use different VLANs to NVX and Dante. You need check if the switch capacity of processing is ok (bandwidth). I think this is not your problem, but, a doble check can help you. Maybe

I am working on? a system using NVX-352 as DANTE sources.There are 15 NVX-352, 14 NVX-D30, and 20 other DANTE devices. I have been trying to get the switches configured correctly. I was able to get

@Julio - email sent. Hope you find it helpful.

Yeah, that joke gets used a lot in testing hardware – it may have just not had the correct MAC programmed in. Not the first time. As long as you don’t have another DEAD BEEF 1234 on the same

I’m sorry… I’m not awake enough and “it was touching itself in weird places” made me laugh a little too hard while drinking this morning… -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D

I've seen that one as well

The Biamp modules were version 1.5. Two workarounds seem to exist: rollback to the older SIMPL, or update the firmware on the processor. Either fix alone solved it. The program was from 5 years ago

Like Steve said, just reboot. If you actually wanted to restart a program, though, it would be "progreset -p:1" for the program in slot 1. wrote:

Its reporting de:ea:be:ef:12:34

Thank you guys for the help! -andy

Yes, I've had a TSW-760 report a weird MAC Address. I don't have record of what the MAC Address was, but the panel was defective out of the box (it was touching itself in weird places and calibration,

I’ve done a few. Couple things are strange about the Hayward. First it only controls the pool or the spa at any one time so not possible(or advisable) to have a single page that is pool and spa

Make sure LG firmware is greater then 3.x.x. Version 3 has serial problems Verstuurd vanaf mijn iPad

The few pieces I put together seem to imply it's OAUTH or OAUTH2-based (or perhaps "inspired" -- parts definitely don't look like pure OAUTH) and despite being called an "open" API it appears LG's

Correct but when I looked at the information it was just model information for refrigerators or open source licensing info. Unlike other products there isn't any application source code that could be

Hi B B, Thanks for your help, I Really don't remember if I set another address. but I believe that in the same way the monitors should take some action or not? [email protected]> wrote: