开云体育

but isn't that the point of a template????? Yes i did it with just buttons and used the grid....it works..but i guess i don't understand what the contract editor is for then.? i thought it was to

I'm using a off the shelf straight through cable that ohms out correctly (all 9 pins) and I can't get the projector to respond.? Same program from a ST-CP using a modular connector on one end (6P-6C

Hi Joe. Just to be clear, are you referring to the RTSP stream generated by the TSW from its internal camera? If so, the I think you're correct that the audio from the TSW mic does not get embedded

I wouldn't use a list for keypad buttons, you can't lay them out the way a keypad looks. I've used Grid for mine, that works well as I can lay the keypad out the way I want it to look. You can still

Hi Rob Simply add a "System 3 Reserved Joins" Device Extender to the TSW and use the System Media Mute and System Media Unmute inputs to mute when a SIP call is active and unmute (if you need to?)

Thanks for the response Joe. ?I suspected that was the answer but have been unable to find a way to disable audio at the source. ?I'm using a Grandstream GDS3710 door station which doesn't seem to

Thanks Scott

It has been a minute since I've messed with CH5, but I think the index should just be listed as idx with no number. IE, < ch5-list class = "source-list" indexId = "idx" size = "4" maxWidth = "1000px"

Well, a few days after writing that, i?ve got an issue with a customer who has recently replaced his CA-X5100 with a CA-X5200. Auto feedback is not working anymore after a program update and it?s

Two DIVMODs (one to pull off the hundreds digit, the reminder from that one to get tens/units. ASUM tens, hundreds, and units with 30h to convert the number to its ASCII equivalent (e.g. 30h = ASCII

I am doing a retrofit to update a home with a centralized Crestron Home OS3 setup, and I have replaced the D3-Pro based lighting with Home OS3 control.? ?I am connecting the clx-1dim4, 1dim8,

You should be able to enter setup mode with toolbox.

Scott, The discord is here: https://discord.gg/T5trWkD Once signed in, you'll see the #ch5 forum within. Best, Scott

Has anyone replaced the 2 microswitches for the top buttons?? If so, would you still have the information to order replacements?? I really don't want to send in for repair and unfortunately, without

Your going to want to do this in s+ if possible will be a lot easier in only a few lines of code

So here's what I'm looking to do. I need to modify this part of a serial string (marked as bold): The appropriate range is 1 to 100. So here's what I got (I'm using a slider/gauge to drive the change

I'm not clear on why EISCs are needed at all here. Doesn't each program just need to know the stream info so it can set its NVX decoder to look at a particular encoder from another room? That info

James, That Discord link didn't work for me. Is it possible for you to share a proper invite link?

A good idea trying a new power supply. I've been seeing a lot of Crestron power supplies failing lately. The thing that concerns me is the CP3 processor lost its mycrestron dynamic DNS settings too.?

One of the big complains I have about the media streamers today is the general lack of a video gui that you can display on a TV and control with a simple remote.? So when I saw the MMS-5a has the