开云体育

Here is the support page for the MMS-2A. https://www.snapav.com/shop/en/snapav/autonomic-mirage-media-server-w--2-audio-streams-au-mms-2a Go to the Support tab and you can download the protocol and an

I am having an issue with a CP3 losing its program if it loses power overnight.? Short power failures no problem.? But client unplugs the rack when there is lightning storm only to find the system

I was hoping somebody could help me. I have an old Crestron system that I self support. I use a CP2E and have a few TPS-6Ls and 4Ls throughout my home. My Crestron Database and Device Database are a

So since labs is shutting down I figured someone here might know how to make this work. I'm trying to use ch5 and I have a simple touchpanel and was going to try to use contract editor to make it so I

I had to delete the IP table and re-entry the IP table entries, then it would take it. Thank you for the alternating way.

Bryan, I've only done one Crestron Home system but I've had this happen and it was dye to DNS settings being messed up in either device. Log into console into both devices and type testdns

Hi, I am trying to get Crestron Home OS3 to recongize DIN-CENCN-2 devices.? ?I can see them in toolbox, and device discovery tool, but they are not recognized in Home OS3.? ?Has anyone encountered

I was doing some quarantine cleaning and found a TPS-6X and HPRFGW.? They were taken out of a seldom-used install and are in great shape.? Not sure of the condition of the batteries in the TPS, but

Nathan, There's a Discord channel for CH5 that might give assistance. https://discord.com/channels/314425881994985472/562746523499233284

RE: the MAC address, I believe you can open the disk image in a hex editor and search for the mac address sequence of the "donor", and replace it with the mac address of the "target" device.

My experience as well - Win32 Disk imager under Win7 seems to do the job, even with SDHC cards (if your SD card reader cooperates). You might have some issues with MAC addresses however (I think this

I've done both with Contract Editor and with simple joins with both the same result.

I have a older Hydro-Spa hot tub that I'd like to control remotely.? The main control board is Balboa I think.? It has 2 ports (8P 8C) that lookes like ethernet.? The top down controller plugs into

Hi Nathan, I’m using CH5 Contract Editor generated classes and passing string works fine, in my case panel has it’s own independent from control system theme and language states and setting in

This sounds kinda similar to plain old vtpro seeming to not display default serial text until it’s sent text manually. Not sure why

Good afternoon all, I've been dealing with CH5 in Angular since they first allowed us to join the crestronlabs forum for it. Over the last year I've updated and rechecked my test UI's, and recently i

Win32 Disk imager works great

Hello Folks We have written a 2 way IP Module for Sony Android TV with full smart TV Control. The module is capable of listing the apps downloaded on the TV with the image and also launching them

Hi All, I am looking to control a Samsung QB55R via ethernet, are there any good known working modules in the App Store or in the files section? Thank you

That's cool idea. We've had frequent failures of TPMC-4SM's years ago, and I was told that we need to send them in even for card replacement. They were not willing to send us SD cards just to pop them