开云体育

I'm not sure what goes wrong. 12V trigger from the projector goes to small relay and output from relay to versiport. So it's just a dry contact. Nothing else connected on versiport. Dňa 15.2.2016 o

Hey Guys!, I am wondering why there are no talk about using a Microsoft Surface Tablet as an alternative to an iPad or Android tablet. With the price of microsoft surface tablet dropping in price like

I saw reply from oliver.hall@... and need to fix my answer. So we have 16 bits that can have a maximum value of 1111111111111111 =65,535 2^16 = 65536 and since we start at 0 the largest

If you can send it to me that would be awesome – Lincoln at controlworks dot com or http://sendit.controlworks.com/ (second option, enter my name in the box) TIA, Lincoln -- Lincoln King-Cliby, CTS,

Yes, all of the devices pointing to the same processor would have the same CIP port (default 41794). I'm not sure why it would be working otherwise either unless they are ignoring your port settings

I'm having the same or a very similar problem - DMPS3-300-C-AEC just installed, Cisco C40, two Cisco cameras connected over Vaddio One-Link units. The Cisco stuff is all existing and as far as I know

I usually add a pro2 slave to the program and move all dedicated connections to it and then replace the pro2 withe the pro3. Seems to work better that way.

Try a different computer.? I've had Crestron tell me it my computer and they made me uninstall all Crestron software and reinstall.? Mine used to crash alot more but now does better.

The dmps has to be told what network the usb ext reside on.? All the USB ext have to be on LAN or patched into a DM lan port.? You can't have some on one and some on another.? I've tried both

Well said. One needs to remember that making everything easy, for the end user, is often times quite complex (at the back end). Good Luck and Best regards, msm Sent: Monday, February 15, 2016 6:00 PM

*ears perk up It’s a DMPS3 and explains why the same logic is confirmed working in another room (CP3) but not here. What needs to be done for/where can the custom module for a DMPS3? Lincoln --

Thanks for this, Jeremy. Does this mean that I should configure port 41794 in the Crestron App on each of the android devices as well? At the moment I am using sequential port numbers starting at

Simpl Windows crashes on a compile. Situation is a client has a system designed with a DMPS-300-C and now is getting a new room but now with a DMPS3-300-C and other then moving from the 2 Series to

Hi Keith, Please don't take this the wrong way – on one level you are absolutely right – but paying for a pro is all very well for those mega-rich people who install Crestron systems so they can

Thanks for responding. It looks like the entries in the log were just startup messages that resolved themselves as looking at the IP table in Toolbox indicated that all of those connections were

Can you ping those servers from a processor console session?

Hey everyone, I just swapped a PRO3 in place of a PRO2 and am having trouble with the various TCP servers I need to connect to. I'm seeing the following errors in the error log: Notice:

Network Device Tree View of the gateway it is connected to, right-click on the HR-150, click on Change Network ID. Trey Sent: Monday, February 15, 2016 2:32 PM To: Crestron@... Subject:

Thanks, all good now

Use change network ID and choose new and apply. From Kam's iPhone 6s