¿ªÔÆÌåÓý

HIKvision also has a NVR. will they work with crestron?

Can the TSW-750 directly stream the HIKvision cameras without the NVR?

The $190ish cameras I spoke of are the DS-2CD2032 dome and bullet models. I have one of each. The build quality isnt great, I wish it came in grey or black. Here's a nice review:

I do not think that you can attach modules to the email list as I do not see anything.? You will have to send it directly to my email address.? sbob1123@....

Hi, I wan to confirm that if on a scrolling text smart graphics control, I check multi-line support it is supposed to wrap the text to fill the control. I currently have a long text string and I have

I was looking at the Hikvision camera and they seem great for the price, I will give one a go now.

I posted the module yesterday, just in any case here it is again.

Does anyone have a module with the RS232 codes for this projector?

I know that there is an issue with the extron switchers at the moment that with no activity the ethernet port will disconnect or every 5 minutes you will see the port disconnect and what happens then

Some random notes form my experience over the last month. Exacqvision NVR & Software: Awesome mobile apps and desktop app. Best NVR software I came across. Limited On Screen Display support and

Aloha, I had the same problem. Fixed it by creating a very simple Simple+ module with a on change event, monitoring the feedback from the RA2. If you want I can email it tonite to you. Mahalo, Patrick

We have a scheduling module that works beautifully for HVAC. We could modify it to route DM easily enough. Mark Day Ideabox Media Group Ž +1 702.332.3156  mark@...

Have you looked at/any reason not for Fusion RV (AKA/FKA RoomView SE). Have many clients using its scheduling functionality to schedule basic events [e.g. ¡°all rooms in the building off at 9 PM¡±]

hello? This module works with all OPC Server? example with central security SIEMENS? if you have information not hesitate? sb.omirage @ gmail.com

I have an application where we are using DM to route various sources to various displays. The original SOW stated that the owner wanted to manually switch sources to displays via XPanel but now they

When defining inputs and outputs in S+ do we need to have the different signal types in the below order? Or can they be laid out a little different? I know inputs should always be above the outputs.

Panel On/Off works great.

i have a large system where the AV/TP's run on an AV3, the lighting runs on an MC3 and a PAC2 handles the actual lighting - all the lighting signals from the AV3 just flow through to the MC3 i.e. no

Not all extron comes with updated firmware. Normally not from my experience. If it still doesn't work after firmware, get the protocol and break apart the module to see what needs to be changed to

The following Crestron poll is now closed. Here are the final results: POLL QUESTION: Toolbox System Monitor, what is your average CPU % ? CHOICES AND RESULTS - <90%, 1 votes, 5.56% - <25%, 15 votes,