开云体育

Hello, Does anyone have a module for Extron IN1606 or1608? Thanks

any cheaper alternatives? has anyone tried integrating cameras from monoprice?

Isn't the function of this module suppose to send a digital high when you press the corresponding button on a Lutron keypad. All of the SET LED ON/OFF work on the left side of the module. But all of

Note that the Parallax piece is TTL... you need a MAX232 or similar to convert to RS-232 levels for use with Crestron. lincoln@...> wrote:

There are a LOT of technologies at play and some country-specific preferences - if there's already an proximity card system in place, you really need to start first by identifying the technology in

All, I am looking for prox reader, that can be integrated with podium, connected to Crestron processor trough RS232. Idea is, to have instructor come in to podium, swipe their prox card, save system

Yes ran into this, very very important to put the nvram stuff at the very top of the program. Found this module does work really really well though. Also if you save the presets on the camera,when you

I have good experience with IQEye cameras in combination with TSW's. They carry a five year warranty and we are very satisfied with their quality and support. We also install Exacqvision NVR's which

There are a couple Crestron modules in the database called "Presentation Timer v1.0" and "Count-down Timer" that should do what you want. Both have analog outputs for timer status.

I can't get this to work either. Works with 2 series no problem...what gives?

You should be able to create a system export and dictate what devices are include in it in the properties.

The 25 presets module uses NVRAM on the processor to store presets - presets are NOT stored on the camera itself. This has all kinds of potential pitfalls but a few to keep in mind (a) You need

You can always use an Analog Increment that you initialize to 60d. Set the repeat to 1s and then just hold the down. There is also a similar way with analog ramp where you set the time to 65535s and

I might have a module laying around that will help you; I'll see if I can find it

I am looking for either a symbol or module that will show on a touch panel a countdown timer from 60 minutes to 0 in one second increments. Plenty of clock and timer symbols in SIMPL but none appear

I am pulling my hair out trying to get presets to work with this camera. I have an AV3 controlling a Sony EVI-H100V PTZ camera and I am using the sony module from the website, I have tried all of them

Hi guys, can you recommend the most affordable security camera/ CCTV / IP camera and DVR that are easily integrated to CRESTRON. I need it to be available online because i'll just have it shipped to

Hello, Does anyone have a module for Extron IN1606 or1608? Thanks? C>

Module crestron OPC Security SIEMENS http://crestron-opc.6mablog.com/ Le vendredi 28 Février, 2014 12:03, "rogier@..." <rogier@...> a écrit: ? On dirait que, devra me faire une de

I am trying to do a simpl + module to display different time zones on a Crestron mobile pro G but before that i want to know if anyone has posted a module for this earlier in the files section yet.