开云体育

We just converted our first D3Pro system from V2 to V3 and got 2 error messages during the conversion. The messages are issued by the Toolbox during D3Pro startup. Any ideas? Thanks. Tom <Pre device

You didn't mention what kind of processor you're using... It may be safe to assume that you're using a Pro2 or AV2, in which case you only need to issue CFLOG ON. As long as you're going to be

what company, benefits, pay Etc? -- Joshua B Zimmerman The beginning of knowledge is the discovery of something we do not understand. - Frank Herbert This message, including any attachments may

Ok so probably a dumb question....but I'm full of them lately. Working on a clients system that seems to be having a lot of dumb errors. In order to track them better i would like to record the error

What do you have to do to get Simpl to create the zip file archive? I have tried numerous things with no luck.

The best way I can think of would be to create a level window block and place it between the volume control and the Biamp block. The level window's min/max signals can be tied to user controls on the

* Kim Agamaite ? We have a great opportunity with a growing AV Integrator in Denver, to come join their team! Some of the qualifications are: * At least two years of programming or commissioning

Why? is what I asked to when I first heard of it. Some consultant in the NY area whom I won't mention has sold the customer the idea of setting min/max levels for each of their program audio sources.

I'm currently learning Simpl Windows, and I'm now trying to implement dynamic presets on a PLX3. I've always used SystemBuilder, so I tried opening the Simpl file generated by SystemBuilder and

I haven't used a Toshiba in a while. Do they have decent discrete support? I kinda recall them not. Thanks guys. I'll try it next week when I go back. Heath

The one I have done I used relays. It takes 3 relays to control the shades and depending on what relays are tripped at the same time as to which preset is called. You have: full open, full closed,

I think we should look at moving this forum to Google groups or a better platform. :-) Set your clocks.

Why?? I created some biamp modules that you can set min/max from the parameters so they could be used for spk vol or tx/rx/mic levels, but why would an end user need to be able to change those min/max

Nope. I have lots of models, but not the outdoor CP series. I think the Toshiba guess is viable. The remote with number buttons at the top and the onscreen menu all remind me of Toshiba. -Kevin

Nope. Time to either roll your own modules or take apart the I2P modules and see if it's feasible/possible to substitute analog values where they are using parameters... - Chip

I think this is a Toshiba.....if my memory is right. Try those for a last ditch effort. Chris [Non-text portions of this message have been removed]

Interesting article. However, hardly an apples to apples comparison as in must cases in our industry there is only one developer of the software, either the employee of the dealer or the CSP. The main

I may actually have these. Give me 15min to check. -Kevin

Just to clarify my question, customer wants to set the min/max values on the fly from an admin page. I understand that static values can be typed in the module parameter fields but what about a

Try this... 0000 006d 0022 0002 0156 00ac 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015