开云体育

few days ago i decided to start my own self study crestron. i bought Pro2 Processor and i have all necessary Crestron Software. any help tutorials, videos, resources would be appreciated. Regards,

Has anyone else noticed that you cannot "move" a subpage in vtpro? i am talking the window when you are editing it. You can move a PAGE by dragging with the mouse.... but try it with the subpage the

I have a system run 8 programs in CP3N for 30rooms with TSW550 or TSW750. some TSW550 always show offline in the IP table. The IP table is set correctly, I can even ping them from each side in

Check eBay these remote are around 200.

Why Crestron did that on the SWAMP is beyond me. I don't think I've ever had any bit of audio kit un-mute when changing sources. I think someone screwed up on the firmware development. Hopefully one

Crestron module needs to get "r" from Clipsal interface to start work.

Weird because I modified all my file ops modules to include \\RM as well as \\CF and NVRAM. I recently popped a module into a program which defaults to CF as its parameter is that by

I had setup my mom with a Prodigy system years ago and her PTX-3 dropped and pretty much is toast. Crestron wants $75 estimate for repair, but I couldn't get any answers on potential replacement costs

Yep. There are totally different operators. It's documented in the S+ help files. [Non-text portions of this message have been removed]

Thus the "This is for a NYC install, if that matters" :D

What I wound up doing was adding a little bit of logic to my SWAMP module. If the SWAMP's mute feedback isn't in line with what the program thinks it should be, then it quickly puts it back. Now when

That's kind of vague... Like asking for a battery for your "Verizon Cell phone" ;) Depending on the specific TW region and what platform the headend or hub was built using that you're in you may find

Anybody have a good one they can share? Do all Time Warner boxes use the same IR? This is for a NYC install, if that matters.

If not difficult give any reference (link) to the protocol, etc. Thank you.

hmmm...

Haven't the paths changed from, e.g. \\cf0\\ to \\rm\\ \\rm1\\ etc.? Lincoln -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect

there is a module for integra in crestron database in SIMPL WINDOWS, it`s called TCP/IP in the end. tested to work:) ASD

Doing a project now. It works fine for me. It is the same code set i.e. "on" for power on, "off now" for power off. (without the quotes) It didn't take anything special so I'd check your wiring.

Never tried through the dock, but the cable for URC and ML-600 will not work. I am pretty sure that tx and rx are reversed. http://www.remotecentral.com/pronto/pfaq-b3.htm _____ From:

Yes, I know. Now rewrite the S+ module with long strings (from the crestron.com). (