I may actually have these. Give me 15min to check.
-Kevin
toggle quoted message
Show quoted text
On Aug 12, 2013, at 16:42, Heath Volmer <hvolmer@...> wrote:
Yeah, I have those codes, but I neither have a helper to pull out the TV nor the cable / connectors to do the serial connection. :-(
Thanks, Heath
On Aug 12, 2013, at 2:36 PM, Paul Cunningham <paul.cunningham@...> wrote:
I'm guessing you need the IR code and not RS-232. The serial protocol is listed on pages 33-35 of the manual; let me know if you need it (HDMI1 = 0X67). I'm not installing Pronto either!
-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Heath Volmer
Sent: Monday, August 12, 2013 4:18 PM
To: Crestron@... com
Subject: [Crestron] Runco CP-42 Codes
Does anyone have codes for the Runco CP42 - specifically the HDMI1 code? Even in hex form? Some genius made the HDMI button a toggle. I have the Pronto driver, but I'd rather not have to install the Pronto software just to grab one code.
Thanks, Heath
Heath Volmer
Digital Domain Systems
Littleton, CO
[Non-text portions of this message have been removed]
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
