开云体育

Thanks Joseph, yes I triple checked that I don't : ) Thanks Neil, that makes sense. -- Sebastian Marszalek

Refer to my crosspoint flowchart for reference: https://www.lucidchart.com/documents/view/453b-0cc0-51266ec0-a956-34730a004d18

MOD A = Y MOD Z; Though (in the 2 series at least) SIMPL+ has no concept of floating point math -- if you need to play with decimals you'll need to use some tricks -- Lincoln King-Cliby,

Sure it's allowed but often not desired. It's rare you'd want to have multiple ECCONNECTs in a set of related crosspoints. For example, if you have an interface CCROSS that you want to connect

Nice diagram. Are you certain its not the signals on CC that are controlling the 'equipment' instead of EC signals? I know thats akin to 'is it plugged in' but sounds like it could be the

Has anyone ever used something like divmod in SIMPL+. I need to work with decimals. Any Ideas?

Turned out to be a bad (new) USB cable.

Yes, I made sure that i disconnect from EC in Module 1 and it still doesn't work. Neil, I get what you are saying but I thought multiple ECConnect's in a single program is allowed? -- Sebastian

Lincoln, Did you add the relevant entries in the PRO3's Ethernet Control Subnet setup page? (I just did the analgous thing for an AV3.) ---John Krommes

Bryston is not actively working on creating a module for the masses. One of the people I spoke to loosely mentioned that if one of the dealers wants to take on that responsibility, they may be

+1000 I'm 3000kms from a large enterprise commercial project as we speak and remotely updating firmware and VTP projects on 90+ TSW-750s. Flawless and painless...

You're also using multiple ECCONNECT symbols in this example. If these crosspoints are all related to each other, you likely want to use a single ECCONNECT to maintain a mutually exclusive connection

First, are you using Crestron software development tools? If so, are you connecting those tools to Crestron hardware? If the answer is yes to both of those questions, then what you are describing is

Thanks. I used an ASUM, SMV, and RMV for the signal delay, took the original analog into a SAMPLE, and then used the ACOMP2 to determine if the motor was moving up or down. Seems like an awful lot of

While I completely acknowledge the growing pains and evolution of the new products, one thing I think some folks are missing are the new tools for deploying firmware and graphics updates such as FTP

Are you disconnecting one EC before connecting the next? Chris [Non-text portions of thi

Am I delusional or crazy? Wait. Don't answer that. I was under the impression that the processors with Control Subnets (Control Subneti?) were supposed to automagically configure port forwarding to

Dmps Rm 100c room box or rm-scaler Dvphd Nick Sent from my eMail.

Hey All, I built a module that has a CCross, ECross and ECConnect to control various equipment. The problem is that, when I have more then one instance of the module in the program and try to

I've never had an issue with rebooting the panels - except for the graphical instability when first touching objects. It's when they aren't rebooting that the problems show up.