开云体育

That's a good question, Joe. I actually have one Series 1 box and two Series 2's sitting in my garage, that I've also been hesitant to just "throw away". A quick Google search didn't really turn up

Check what your panel is set at. ?I had the same issue. Sent from my Galaxy S?III

Did they released V5? I used last week V4 on RA2 modules, came out really good! any improvements? -- *Jesus Tossas* * * *Technology Architect, Audio Engineer, Programmer* * * *787-460-1223* * *

This has happened on the last 2 devices I was playing with (iport and mirage server) where the serial text is truncated to 11 and 5 characters respectively in debugger. There's no logic in between the

I'm cleaning out a closet and came across a TiVo Series 1; I boxed it up and transferred the license when I replaced it with a TiVo HD. I hate to throw out useful electronics, does anyone have any

As a matter of fact, that is the exact model I went to. So far they seem to be working just fine. The only issue I have with them is that they tend to create errors no matter how close you have them

Thanks Dave, I suspected that would be the case when I logged into the Crestron website and say "Discontinued" in big red letters. Thinking of switching too MLX-3 panels anyway, for battery life and

Thanks Dave, I suspected that would be the case when I logged into the Crestron website and say "Discontinued" in big red letters. Thinking of switching too MLX-3 panels anyway, for battery life and

Unfortunately, I don't have a fix for this. I just took 2 4X's out of service due to a continual problem just like this one. I also had problems with the 4X's locking up the system as a result of

Exact same router I've been using for the last 12 months! It can't see any wireless network at all, so I assume the wifi card is knackered.. back to Crestron it goes :o(

you changed the router? the tpmc only see wifi G and B _____ De: Crestron@... [mailto:Crestron@...] En nombre de rlf79cm Enviado el: sábado, 23 de marzo de 2013 10:03 Para:

Had a TPMC-4XG running fine for about a year, no problems at all, but as of today it won't connect to the WAP and the "Scan" option under the setup/wifi access point settings isn't showing a single

model number is :PBACM - PT300 the the Behalf Camera the

You mentioned radio Ra 2. Make sure you go to the resi.lutron.com/radiora2 site and download the new R05 version of the modules. Its the older stuff will completely fill your cp3 with errors and dump

You really need to use the 6P6C connector and six conductors. The single conductor in a 4P can't carry the load for some devices. That said, I just make my own. You can buy the crimping tool from

It did eventually connect after a number of ties.. What in the world is going on with this tool...

I too have seen this many times. My personal favorite was an old Essentials class program running complete with web xpanel. It was from "Joe's Laptop" and Joe needed practice. I would agree that if

So I start up the Infinetex diagnostic tool and it connects and goes thru a bunch of steps, but then at the very end just locks up really bad where you cant quit toolbox and requires task mamanger and

Ok, here is an odd one. When I change to another App and then change back to the Crestron App, it is like it has a photo of the UI in the background and a functioning one in the foreground. For

There are quite a few vendors for custom made cables of all sorts. Try Cables to Go first. http://www.cablewholesale.com/ -- Yours truly, Victor [Non-text portions of this message have been removed]