开云体育

I had a similar issue - got around it via separate VLANs and firewall rules to limit the multicast traffic from overwhelming the network. [email protected]> wrote:

Would that not just flood network as well? I should have mentioned, for this site, they are using the Araknis AN210SWR24POE switch.

It's best to use a secondary unmanaged switch for the Sonos. [email protected]> wrote:

Has anyone successfully setup a Crestron Home system with NAX and Sonos on the network? Running into issues, seemingly revolving around multicast, with NAX and Sonos being on the same Network/VLAN.

Hello, is it possible to have a copy of the poly G7500 module you used.....Thanks in advance

I played with Construct for about an hour.? My main takeaway was "time to knock the dust off my HTML/CSS skills" and went down that avenue instead, although Crestron has issues there as well

I love this group!!! BTW, I have already programmed/tested the User interface and that is the only part that I'm not concerned about...(Who knew!!)... Though, As with every updated generation of

There's some misinformation there. The long integer to integer warning is a genuine warning that you may be losing data due to downcasting from 32 to 16 bits. Whilst it's never normallly an "issue"

On Thu, Dec 7, 2023 at 03:08 PM, XSDS wrote: > > 1. Who designed these things?? clearly no one who has installed them or > had to take one off its base to service it!!! > Seriously!! We were already

The crashing while trying to acquire I have seen in the field and in my case it was always due to the remote shipping with old FW.? I updated the FW to release and that issue went away.? Also for

Yes, you can set the alarm via RS232, I do it every night. There is a keypad simulator, it works just like the panel keypad.

With respect to mounting and future service needs/requirements, we typically utilize a mud ring or back box, horizontally Deployed/mounted. As an alternate approach, use an auger screw-type fixing

Make that email to support @ justaddpower.com or go to support.justaddpower.com and open a ticket. Ed Qualls Just Add Power

The "long integer to long integer" prompt is a common error message we have seen the last few years. We believe it is a file dependency issue related to how users migrate our Crestron module files

On Thu, Dec 7, 2023 at 02:56 PM, ckangis wrote: > > So as not to keep my ardent fans waiting, I thought that rather than wait > until the end, I'd post individual updates...:) > > Today I started to

So as not to keep my ardent fans waiting, I thought that rather than wait until the end, I'd post individual updates...:) Today I started to *bench* the (7) units to get them ready - Wifi connect, FW,

I just timed it, my build speeds are 1 min 16 seconds for the first build after starting Construct. After that it's around 35 seconds for each build. I'm using it on a iMac that's running Boot Camp

There's a Toolbar Option to view the built code. It generates HTML (sample): <ch5-background scale="stretch" refreshrate="600" transitioneffect="ease" transitionduration="1s" assetid="0" id="ifp3"

Does it build the backend as well or just the ui?

Yeah, Formatted-Text does need improvement, as well as MultiLine Text on Buttons, and Button Modes would be nice....been using Serial Strings with Font Awesome and Contracts for each in the