开云体育

It has been close to 4 years I've been dealing with UC engines. Every single one of them touch panel disconnects for 5-10 seconds, very often.? I gave up asking for support long time ago as nothing

If the mac address for an MC3 is 00:10:7F:8A:BE:54. In HxD this is what I do: Text replace all for 7f8abe54 with last 8 of new devices mac address, has 690 results Hex replace all for 00107f8abe54

Hi all, Been on this group for a long time and have learned alot from the conversations on here but this is the first time i had to ask for advice lol! So we have a site with a multitude of Asus UC

Yes I'm just looking to turn on/off and select inputs.? I would suspect that it also uses the same rs232 commands, however it didn't appear to yet, unless I have a different code set. Any thoughts?

I seem to have it working. In case it helps anyone else,? I had to create card with HDD Raw (this would not work) then read that card with WinDisk32 to file and rewrite the card using that file with

I've experienced this and setting up 130 nvx 630 and 30 nvx c and experiencing problems but in the end it can be resolved, right? Pada tanggal Rab, 29 Mar 2023 20.48, proggieus <t.tvetene@...>

Hey there! Just curious, this "no span tcn flood" you just mentioned, what other names does it have? I mean, how do I look for it in an Alcatel (OS2360-P48X) switch? I'm not a network guy, but have a

Sorry, there actually seems to be something wrong with the image I uploaded, I'm also reading 319kb file size. Will get back to you when I return to the office on Thursday, I'll probably be able to

That sounds like the image didn't clone to the new card properly.. Did you check the card?

Thanks so much, I have tried this but it will not boot, even after factory reset.? File size is a tenth of the old one at only 319kb.

Here's the image of a CP3 I took a few months ago: https://www.dropbox.com/scl/fi/ke8hcqdfehih2kohdljrx/Crestron_CP3_SD_card.imgc?rlkey=s10vyrvexgidh1tzbht6alm3t&dl=0 I used the HDD raw copy tool. I

I desperately need an image of the SD card for a CP3 (and ideally CP3N) if anyone can share with me.? Will immediately change MAC address, etc. Thanks in advance if anyone can help.

My latest article, "New Amazon Service Could Disrupt the PERS Industry” is being published by the good folks at Residential Tech Today Magazine on their web site.?? To bring news and events Amazon

You can send a direct macro command via TCP/IP using an SIO or Serial Send Port 5951 IPAddress (IPaddress of Tricaster) Command: <shortcut name="play_macro_byname" macro_name ="Macro-1"/>\n Where

Can confirm this is correct. When the TV is on, art mode brings up art mode, any input brings it back to TV mode. I generally use art on as the standard off and use a push and hold to trigger full

2N has an access control system with open API that you could use. Sent: Monday, October 30, 2023 11:54 AM To: [email protected] Subject: [crestron] lenel access control integration Anybody integrated

Just finished integrating these FRAMEs. ART Mode ON works like an input. If TV is OFF, you have to turn the set on to use ART Mode (or the other inputs of course). We're using ART Mode for the 'Off

Anybody integrated a Lenel Access Control system into Crestron? Or any other enterprise scale card reader security system? My college is asking about it. Thomas (Trey) Herb M.A. Ed., CTS A/V Systems

True Blue Support is actively investigating this issue related to D3 systems with HZ-KPCNs using the latest DevDB. The workaround in the meantime is to roll back DevDB to 200.295.001 before

I don't think an input command kicked it out of art mode, but I was implementing them in an out of state project, so my testing wasn't as thorough as I would've liked. I was able to get the behavior I