开云体育

During last few months we are having a constant problem with communication between video camera and UC-Engine. UC-MX50-T Crestron Flex Advanced Tabletop Medium Room Video Conference System for

I found it more #Simple then all that. You can use discrete On, just not off. So, I use a D-On for on, and power for off, and throw an interlock in so it only fires the off once, when off is

Hi All I updated yesterday to the Current Device Database 200.305.001.00 and can confirm it broke D3Pro. got to site this morning to load a project I worked on over the weekend and got the error

What Caleb Said... Here's a couple other console commands for slaves: SLAVESTATUS? ? ?Returns Current Slave Status MIPT? ? ? ? ? ? ? ? ? ? ?Returns Slave IP-ID Table Slave mode is good

I would probably do the opposite. The cp3 can run multiple programs and has more ram, where the RMC would need a license for more than one program.

Rather than slave one processor to another, I generally prefer to run a second program on the second processor, and have the two processors talk by EISC.? Especially on 3rd gen processors, whatever

In console, on the cp3, use the ADDM command. ADDM [ip_id] [ip_address] ADDM 03 192.168.1.10<tel:03192168> Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer |

Is it possible to SLave a CP3 off an RMC3?? If so, how,? I cannot seem to see how to set theCP3 as a SLave, eitherethernet or Cresnet.

Can the lighting console send out OSC or ArtNet? ?Those are easier to parse and react to over Ethernet without additional HW. Michael Block

The Enttec ODE should be able to do that. However, i‘ve only used it for sending DMX before. I think the challenge will indeed be to keep up with the data flow. Cheers, Thorsten Gesendet von Outlook

The Chauvet DJ DMX-AN 2 can be used as a transmitter or receiver. I think the tricky part will be parsing the data fast enough.

It very kind of Ben to plug the Ultamation device; but sadly in this case it won’t help as we’re DMX out only as well. ?The old serial CG-DMX-512B has DMX in though.

Crestron CGDMX512-BI, unfortunately discontinued, maybe get a used one... Best regards Crestronfreak55

Thanks so much Alex

try this https://shop.ultamation.com/index.php/product/85-dmx-controller. I've heard good things ? -- Ben Clay <http://www.autm8.com.au> Ben Clay ben@... 0408 299 796 www.autm8.com.au

Use a CueServer. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC | Crestron Services Provider | 8228

I have a situation when my customer wants to use his lighting console to control his house lights that are already controlled by rs232 via the pro3. If i were able to receive DMX i think its

This explanation is exactly what I would say I am experiencing. It seems like all the empty space allocated to the string is being printed with the string.

Matt- I ended up just hard coding these text strings with an MSEND. I don't think the users even knew they were editable before anyway. That might be the easiest option in your room too. -- Josh Winn

I was on a hardware processor (RMC4, I think) when I saw the same issue. My guess was firmware, since I'm told the module worked fine before. It was reading strings from NVRAM (not a file). There was