开云体育

The message saying it needs formatting is normal (don't do it though). That's because the data that's on it isn't formatted for Windows. Not sure why you're not seeing it in WinDisk32 though. It

Thanks Andrzej, This is what we ended up doing as we were running short on time.? Thank you for taking time to reply.

Hi Igor, Thank you and sorry for the late reply.? My mails from here seem to be bouncing back.? I will definitely play with this a bit more. Regards,

I am using HDD raw copy: https://hddguru.com/software/HDD-Raw-Copy-Tool/ AFAIK this works very well for both AMX and Crestron controller CF and SD cards. NB: cards for Crestron controllers will have

Bare in mind that many USB to SD card readers do not support burning images.? Even the SD card readers built into many laptops do not support burning images.? I have never used WinDisk32, but that

As soon as I insert the card I get the message to format it and it doesn’t show up in WinDisk32. assumed I would need something else in windows.

It will create the image as well.

Is there a Windows based tool to get an image from a good SD card? I know I can create a good SD card from an image with WinDisk32 but want to create backup images of a couple of my devices.

Same problem, with the HZ-KPCN model what I did was change the “Vitrual Interface” from false to true and back. After that the compile was complete.

I have used the serial and ir 2.0 modules, been working fine for about 6 months, I used the GC ir strings, it is just the hex code part, not that sendir string they have. Sent: Saturday, October 28,

Hi All, We have our first project coming up with MXnet, and I'm looking at using IR control not only to TVs thru the Decoders, but also source control (FiOS Boxes and AppleTVs) thru the rack Encoders.

Hi Jonathan, Does the Art ON command act like an input command, or like a display mode. I.e. do I have to turn Art OFF in order to select an input, or can one just select the input (ex: HDMI2) and

If you've confirmed the wiring and baud rate is correct probably your Set ID data is wrong.

I had to rollback the device database and I resolved it.

Yes the project I had trouble with had gen 1 Horizons in it.

Hi, woundering if any of you had any luck controling the LG 49VL or 55VL. I follow the RS232 protocol from their manual but no luck. Sending:?ka 00 01\x0D Any help would be greatly appreciated.

Same issue here. Project with HZ keypads, a couple rooms folders do not get a name in the D3 generated Simpl program so it does not compile. Just have to complete the MSEND symbol and compile in Simpl

Nice, Thanks Eric!!

Thanks for the reply John. Since we get the correct FB in debugger when pressing the Davinci glass Keypad we figure the board to be ok. -- Sincerely, Craig S. Abitz President Installation Specialties,

Thank you Jon -- Sincerely, Craig S. Abitz President Installation Specialties, Inc. 9 Albertson Ave., Suite 4 Albertson, NY 11507 O: 516-484-7929 F: 516-484-7933 C: 516-509-4405 "CONFIDENTIALITY