开云体育

Hi all, I have a customer that has a Vimar By-Me system for lighting, who wants to control it via Crestron. Has anyone of you ever done this? I see an interface on the European Crestron site, but no

It cannot. The manual says it can, but look at the audio block diagram. I've verified this with John Lamberson at Crestron Midwest. Use an HD-DA2 to extract the audio if needed. I Chris [Non-text

Looks like the V-15 has internal speakers, does anybody know if it can handle audio from an HDMI input on the DGE-2? Can the DGE-2's "audio outs" be made to send the audio from an HDMI input? I called

Thanks guys, this is my first DVPHD and I think I get what is going on here... As far as the system goes, it will not be used as a touch panel as the main output feeds a projector. A DM switcher feeds

Don't use the demo or the OOTB pages. Create a project in VTPro, make a page, draw a video object on it. When you do properties on that object, you'll see that you can assign an analog join to it for

if you are only planning on using the program (simpl) to control it and not as an actual touchpanel, you only need to create a VTPro project as a DVPHD and draw the video windows on a page or two. It

Have you made a VT-Pro file to load to it? You define your sources there. [Non-text port

Trying to make sense of how to control the DVPHD, it looks like it should be fairly straight forward but a few things don't seem to make sense. I have got the demo program and would like to do the

I could do one-way IR as well, but the soldering of the pins to the DB9 is beyond their technical ability. :) Directly with an end user, just faster with IR.

Which reminds me of something vaguely related that I thought worth posting wait() (and iirc cancelwait/retimewait) functions do not "take effect" immediately; they manipulate a queue that is processed

I see sometimes the 2nd, 3rd and 4th programs fail to start or show as unregistered after I do an upload. Is there something I don't know here? All IP tables are correct and after I finally get

I've had two of their consumer units at home… and been less than impressed with their reliability and stability. Maybe the commercial unit is better. My main issue with the TED5000 consumer unit was

You may need to use a digital join combined with an ACOMP2 to determine if the preset value is 5 digits (exceeds 9999d) and substitute the following tag: <cipa>A$1?%2.2f</cipa>

Use CIP tags for analogs with floating point formatting. Example: (would display analog join 1 in any text field with 3 integer places and 2 decimal. <cipa>A$1?%3.2f</cipa>

I just check and it not there. can you send me your email address? and i will send you the file.

No available 232 port? - Chip

Oh, didn't see it on a search of the section...thanks.

would something like this work for you? The pro model is geared toward commercial power: <http://www.theenergydetective.com>

Any suggestions for an easy-to-interface voltage sensor? I'm trying to tie this into our building Crestron system, and want to be able to monitor the voltage of all legs of our three phase power.

I have a dn-v210 posted in the IR file selection.