if you are only planning on using the program (simpl) to control it and not as an actual touchpanel, you only need to create a VTPro project as a DVPHD and draw the video windows on a page or two. It is fully customizable. last one I did was connected to a DM switch so all the routing was done there and I used the DVP for a quad screen, dual, single.
Godd Luck,
cyberbri
toggle quoted message
Show quoted text
--- In Crestron@..., Phil Bridges <gravityhammer@...> wrote:
Have you made a VT-Pro file to load to it? You define your sources there.
On Tue, Jun 18, 2013 at 4:53 PM, avsystemdesign <avsystemdesign@...>wrote:
**
Trying to make sense of how to control the DVPHD, it looks like it should
be fairly straight forward but a few things don't seem to make sense.
I have got the demo program and would like to do the following.
Select a window configuration ie 1x1 (single image), or 2x2 (two images
side by side), I would then like to select which input should go to those
windows.
From what I can tell, 10d (input 1) - 80d(input 8) selects inputs, but
what join on the DVPHD symbol do I send these to? ie which join relates to
which window 1 to 8?
In the demo program it kinda seems like analog fb 1 - 8 could possibly be
windows 1- 8? This part has me a little confused...
Any guidance is much appreciated, this cant be hard, I'm clearly just
missing something simple.
[Non-text portions of this message have been removed]
