¿ªÔÆÌåÓý

--- In Crestron@..., Heather Baiman <heather@...> wrote:

Do you mean a serial module or an IR driver?

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of cheinemann605
Sent: Friday, March 22, 2013 3:39 PM
To: Crestron@...
Subject: [Crestron] dish network IR modules

Does anyone happen to have IR modules for the dish network VIP722 & the 311? It would be greatly appreciated and save me a lot of time building modules if someone already had these. Thanks.



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "Siong P Low" <sp@...> wrote:

I am not 100% certain on this, but am pretty sure that the query command is "?OUTPUT,1&#92;n".

The Action number is only for actual commands:
For example, Action 1 is set output level
#OUTPUT,1,1,80,4,1&#92;n - this will set unit ID 01 to 80%, 4 sec fade, 1 sec delay
#OUTPUT,1,2&#92;n - will just raise the level of unit ID 01
... and so on.

The query command does not use the Action number, I believe.


--- In Crestron@..., "sevenstarokawari" <tabata@> wrote:

I am glad to get kind reply from you.
OK,,, i will try with "?OUTPUT,ALL_DEVICES,1"

Do you know what's the meaning of the last "1"
According to the manual, it says "Action Number"
I can't understand...


--- In Crestron@..., Eric Williams <ewilliams0305@> wrote:

Its been a while but instead of "1" try the commands using "ALL_DEVICES" as your integration Id. It will definitely work for polling not sure about setting levels.

-----Original Message-----
From: "sevenstarokawari" <tabata@>
Sent: ?€&#65533;3/?€&#65533;21/?€&#65533;2013 9:09 PM
To: "Crestron@..." <Crestron@...>
Subject: [Crestron] Re: Lutron QS Request Command <--Please someone help!!




--- In Crestron@..., "sevenstarokawari" <tabata@> wrote:

Would someone advise me the command to get all zone's brightness of Lutron QS simultaneously?
Actually I sent"?OUTPUT,1,1<CR><LF>", but nothing happens.
The Lutron QS ID of mine is "1"


Regards,

--- In Crestron@..., Rapha?l Thiffault <raphaelthiffault@...> wrote:

Sometimes the person who check the product at crestron forgot to
reinitialize device.

{Paf}
Le 22 mars 2013 08:40, "jcdigitalmethod" <j.j.cunningham@...> a
¨¦crit :

**


Just opened a new DMPS-300-C and found a program already loaded on it.
Anyone else see this? 2nd one I've seen like this in a year. Are they
taking refurbed boards and throw them in new chassis? I thought they are
legally supposed to disclose refurbished product as "refurbished product"
not new.

--- In Crestron@..., Paul Cunningham <paul.cunningham@...> wrote:

AudioControl amplifiers. They're not the cheapest, but they are small (3U), relatively cool, rock-solid*, and powerful. They can withstand some serious abuse, including multiple 2-ohm loads on a single amp. As to control, there are multiple options involving dry contacts and 12V which work as expected. The DSP/EQ on thusly-equipped models is easy to set up. They ventilate passively bottom-up, and you can stack up to 3 of them together for a "chimney" effect with no problems.

Just put your matrix/preamp of choice in front - PAD8/BIPAD, Extron, etc.

*The D3200 has proven unreliable on the Ethernet side; I have high hopes for the upcoming D3400 & D4400 but nothing to report just yet. The *1 amplifiers suffer from the same Ethernet problems.


-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Etienne
Sent: Friday, March 22, 2013 7:19 AM
To: Crestron@...
Subject: [Crestron] OT: Multi-room amplifiers

Hi,

I love using Crestron Sonnex, but for some projects it is just to expensive. The AAE's aren't bad, but sometimes they are "too light" for some projects.

What do the rest of you use if you require more power than AAE's, but at a budget? I need a unit with at least 8 zones (16 channels), full and reliable control, pre-amp and amplifier in one or separates, BUT cost less than Sonnex 24x8.

Thanks!



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "javiermazon_com" <javier@...> wrote:

Hello guys,

I've recently found some information about a DMCO-77 future relase. It seems to be an DMCO with RSTP streaming capabilities. I'm wondering if there's any information about it somewhere..

I would be excited to integrate DM signals into TSW through RSTP h264.

Kind regards,

Javier Maz¨®n

--- In Crestron@..., Jonathan Waldrip <jonwaldrip@...> wrote:

I can give you the contact info for Crestron Reps in Seattle if you don't
already know them.

-Jon

From: erikm_101 <erikm101@...>
Reply-To: <Crestron@...>
Date: Thursday, March 21, 2013 8:12 PM
To: <Crestron@...>
Subject: [Crestron] Re: Looking for Leads on a New Gig






Thanks.

--- In Crestron@... <mailto:Crestron%40yahoogroups.com> ,
"jrw_96" <jrw_96@> wrote:

--- In Crestron@... <mailto:Crestron%40yahoogroups.com> ,

"erikm_101" <erikm101@> wrote:

Hello Group,

I find myself thrust into the unfortunate state of no income stream :(

So, I am looking for a new gig. If anyone knows of an available position,

please let me know. I am currently looking in the Seattle, Denver or Dallas
areas, but will consider other locations as well.

Me: Silver Master (Gold after one more Masters class), AMX ACE

Design/Programming (expired) with 20+ years in Crestron & AMX programming in
commercial and residential markets.

Any leads would be greatly appreciated.

erik

I don't have a job to offer but I wish you and yours the very best in these

times of tribulations...

JRW

[Non-text portions of this message have been removed]

--- In Crestron@..., "erikm_101" <erikm101@...> wrote:

Hello Group,

I find myself thrust into the unfortunate state of no income stream :(

So, I am looking for a new gig. If anyone knows of an available position, please let me know. I am currently looking in the Seattle, Denver or Dallas areas, but will consider other locations as well.

Me: Silver Master (Gold after one more Masters class), AMX ACE Design/Programming (expired) with 20+ years in Crestron & AMX programming in commercial and residential markets.

Any leads would be greatly appreciated.

erik

--- In Crestron@..., "Tony Golden" <mrgolden@...> wrote:

Yeah, that sounds easy enough... :-)

--- On Friday, March 22, 2013 at 6:23 AM, Rapha?l Thiffault wrote:

Submitting that problem to crestron to get a fix on next release will be
the best solution.


Le 21 mars 2013 23:00, "jaaronart" <jaaron7@...> a ¨¦crit :

Thanks for responding. The changelog for VTPro mentions enabling the
z-order features for other panels, so it seems like an oversight to
me, like someone forgot to set that flag in the database.

In fact, if I save the project as a TPS4L project, I can set the
z-order option, compile, and upload to the FT, and the project works
just the way I wanted. Just annoying that I would have to resort to a

"hack" like that.

I've emailed TB, see they respond with anything useful.

--- In Crestron@..., "fabiodaubermann" <fdaubermann@>
wrote:

Been there, done that... The flip-top simply doesn't have that option.

Which tells me that probably a separate team of engineers worked on
the flip top model than the 4L. Other than that, I can't imagine why
the hardware would be different between the two models.

Weak...

The last triggered subpage is what always shows up. You will have to
do

some tricks with delayed pulses or something...

Fabio


--- In Crestron@, "jaaronart" <jaaron7@> wrote:

Does the flip-top TPS4 not have the option for sub-page z-order?
I've

always preferred the option for "Follow subpage-reference Z-order" for
my projects, so I can always be sure of how the subpages will display.
The
C2N-FT-TPS4 doesn't have that Compile option, but the TPS4L does.

I can't recall if the option was there before and has disappeared
or

if I'm just thinking of other touchpanels that I've used.

Can someone confirm if this option was ever available for the ft-

tps4?

I just updated everything with Master Installer last night, so I'm

wondering if a recent update may have done away with it.

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.

Yahoo! Groups Links

--- In Crestron@..., "innoventgroup" <innoventgroup@...> wrote:

Check out the answer id 5282 on Crestron online help (thanks to Ted for finding it). It will tell you everything you need to know. It seems to work quite well. Still looking for an app that actually has the return function.

Have fun,
DAVE

--- In Crestron@..., "badgoliath42" <badgoliath42@> wrote:

Hey people. I just noticed that there was a "Launch 3rd party app" and "Return to launch app" reserved joins in VT Pro-e when editing my current iPad project. I tried them but they don't seem to do anything.

Anyone knows what it is used for, or if it's for a future release? I got some iPad app my client needs to launch manually to control other stuff, and it would be interesting to add it to the Crestron project.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of innoventgroup
Sent: Friday, March 22, 2013 4:43 PM
To: Crestron@...
Subject: [Crestron] Re: Reserved joins on iPad

Check out the answer id 5282 on Crestron online help (thanks to Ted for finding it). It will tell you everything you need to know. It seems to work quite well. Still looking for an app that actually has the return function.

Have fun,
DAVE

--- In Crestron@..., "badgoliath42" <badgoliath42@...> wrote:

Hey people. I just noticed that there was a "Launch 3rd party app" and "Return to launch app" reserved joins in VT Pro-e when editing my current iPad project. I tried them but they don't seem to do anything.

Anyone knows what it is used for, or if it's for a future release? I got some iPad app my client needs to launch manually to control other stuff, and it would be interesting to add it to the Crestron project.

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "badgoliath42" <badgoliath42@...> wrote:

Hey people. I just noticed that there was a "Launch 3rd party app" and "Return to launch app" reserved joins in VT Pro-e when editing my current iPad project. I tried them but they don't seem to do anything.

Anyone knows what it is used for, or if it's for a future release? I got some iPad app my client needs to launch manually to control other stuff, and it would be interesting to add it to the Crestron project.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of badgoliath42
Sent: Friday, March 22, 2013 4:23 PM
To: Crestron@...
Subject: [Crestron] Reserved joins on iPad

Hey people. I just noticed that there was a "Launch 3rd party app" and "Return to launch app" reserved joins in VT Pro-e when editing my current iPad project. I tried them but they don't seem to do anything.

Anyone knows what it is used for, or if it's for a future release? I got some iPad app my client needs to launch manually to control other stuff, and it would be interesting to add it to the Crestron project.



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "cheinemann605" <cheinemann@...> wrote:

Does anyone have a 2-way rs232 module for the Elite VSX-91TXH? Thanks.

--- In Crestron@..., "innoventgroup" <innoventgroup@...> wrote:

Does anyone know how to figure out the URL for a APP on an iPad. I would like to use the Crestron Mobile Functions Device Extender to launch an APP for the client.

Thanks,
DAVE

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of cheinemann605
Sent: Friday, March 22, 2013 3:39 PM
To: Crestron@...
Subject: [Crestron] dish network IR modules

Does anyone happen to have IR modules for the dish network VIP722 & the 311? It would be greatly appreciated and save me a lot of time building modules if someone already had these. Thanks.



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links