开云体育

Hi Chris, I don’t think anyone could do more than speculate on the first two concerns - other than Construct is improving all the time and the MPO is on the list, but without a *firm* commitment to

After a long delay I was back at this job today. I was able to get the Just Add Power switch working but control of the source Directv boxes and displays is still basically a mystery. It appears the

:)

Hi All, I heard that it was announced that all new panels(UIs?) will only support HTML5/Construct. This of course pushes the deprecation of VTPro closer, which I expect of course. I'm assuming that

FYI... So you can Add a 3rd (or more?) IPT entries by way of the console command, but SystemInfo ToolBox, at least the latest version, v3.13.6, only lets you add up to two entries. Once added, it

This reminds me of a conversation a Crestron sales and sales engineer had with potential? client 10+ years ago, how Crestron switched away from WiFi with their wireless panels and remotes as it was

I haven't seen any downsides to rolling back firmware for systems programmed in SIMPL. But I would do a factory reset after downgrading firmware. But yes you have to use v3+ firmware with Crestron

I have had these units on dedicated SSIDs locked to only one AP for each remote for a while now, so they would not roam. With the v3 firmware, I have moved them to 5ghz band only. Like Alex, I have

@ckangis, I haven't heard anything like that. There is a requirement to use the tsr-310_3.000.0010.puf FW with the latest version of CH or vice-versa. I'm pretty sure I saw that somewhere recently.

While we also use multiple VLANs I have never seen the need to put Lutron on its own VLAN. I only do resi and I am also the Lutron programmer. To me Lutron is so difficult with its networking needs-

You bet! Glad it worked! Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC | Crestron Services Provider | 8228

It works great.? Thanks again Jay

Thanks Caleb! I'll give that a try. Jay

JsonSerializerSettings settings = new JsonSerializerSettings { NullValueHandling = NullValueHandling.Ignore }; string json = JsonConvert.SerializeObject(account, settings); Console.WriteLine(json);

Is there a way to not serialize a property in an object that is not initialized.? Something like the [JsonIgnore] but I want to include the property if I set a value for it and leave it out of the

I have had all types of issues with the later versions of TSR310 firmware.? So much so that I now only use v2.001.0134 firmware on all my installations. For sluggish response, I have found the TSR310

So I just tried to add a third IP table entry to my CEN-GWEXER thru TBx/System Info and found that It wouldn't let me. This begs the question: - How many entries are actually allowed? - How would a

Hi All, We have a site where the TSRs are seemingly sluggish and sometimes won't populate SubPages (This is a custom system) Here's an example of some pings that are consistent with 3-4 TSRs of

Anyone know what this is/means?? 1. Notice: servicesd.exe # 2025-05-17 11:02:50 ?# CrestronMIB: Exceded 3200 It's from a Pro3 with the latest FW just updated. I got 500 of them with the same

I don't write Simpl+, so I am unsure as to what would be needed for that, but if I had to take a stab at making a minimum number of changes to fix your serialization issue with the http request this