开云体育

Sounds like the provider is blocking a needed port. If you know the port you need, sometimes calling the provider will get the port unblocked. Good Luck! Dylan

I have tested on a cp3, cp4, and VC-4, all of which have previously worked. When I load to a fresh processor, I get the message "Please contact dealer to setup custom providers on the control

We have had issues where presets dont work on a system that had been running for a while after a program load (update) TB told us to turn on PROGSTARTAFTERROUTER ON on the PRO4 and that fixed it. Are

We've been using TV presets V2 since its inception.? I'm finding that when I load a program to a processor for the first time and go to the presets page, I get this message, "Please contact dealer to

Appreciate the link!? we looked into these as well

Thanks, Rob, that's perfect ;-)

Thx, Chris.? Overall I've found the same over the years, MMS is just the "best" way to go - Best being better than the rest, but still we have that nagging lockup requiring reboot that happens across

Hi All, I am looking a driver for an OPTOMA UHZ 66 to be connected on Crestron Custom system. Could one of you help me? Regards

Same thing here. One of my clients just upgraded to the latest SAMSUNG smartphone and the Crestron Go app fails to load the project correctly , "project name was not found".

That doesn't seem right. Unless your router's DHCP server is set to use the full IP range (10.0.0.2-254) as many are OOTB vs. a limited, managed range .2-.100 for DHCP and .101-.254 for static... A) A

That?s why you would use fixed DHCP leases or static IPs. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Craig Abitz Gesendet: Dienstag, 13. August 2024

Problems with an IP device after a period of time has always been an IP address conflict for us. After a network reboot or device being asleep, something else grabs the IP address intended for, in

In our experience this is really simple. We have been using TSR 310's? for some years on many projects, and NEVER encountered a wireless problem. I even have a couple at home that are used every day.

So it doesn't seem to be that easy I was thinking and reporting first. So after some time the TSR-310 in my living room got instable again. So fixing the channel to 11 on 2,4 GHz Wifi and setting the

Hi, can anyone provide a picture or text of the sticker on the newer Yale module? ?I have a CLK-YL-YRD256-CR2 and it doesn’t appear compatible with the older RF modules used in my old

Restart simply crashes the system and makes your program stop :)

MQSACK, did you figure it out? I am getting a message on an Android tablet that Manifest file for 'the project name here was not found. This is a first time trying to use Android at this site. has

just start the aes67 stream and the qsys aes receiver will find it just like it finds the dante regards

Aqara manufactures a high quality lineup of smart home products.? Their latest is the new FP1E Presence Sensor.? The FP1E utilizes a mmWave sensor that is so sensitive that it can detect the

Hi Jonathan, Thank you so much for this. It was extremely helpful. I feel I'm starting to near the part of my programming journey where I move from SIMPL Windows on to SIMPL+ to accomplish more