开云体育

How you make the first initialization works? For me I need always to use C-Bus Diagnostic Utility, connect the?c-bus PC5500 and control it there, Once I can control it, I remove the cable connected

If it’s like the TSW-730/732 it shows up on a device extender (but I’m not opening SIMPL right now to say which one ;) ) – note that the switch short is from 24 to the input, not the input to

The webpage indicates that it has 2 Occ. sensor inputs. looking in SMW I don't see any triggers into the program (maybe I missed it??) It may be something dedicated to some built-in app function... I

Need a Network guy that knows Cisco , ?asap in Houston area.

OK will give that a shot thanks, Really only need direct set for volume all the way down @0 and another one for like 35 percent

EX-Link,Lincoln

A NEW CHALLENGER APPEARS!

This one? -?https://greenpointtdi.com/product/gp-nvx-manager/

CH is about as good as System Builder is about as good as Construct. Do yourself a favour and use SIMPL and VTPro.

System Builder SUX? From: <[email protected]> on behalf of XSDS <xsdesignstudios@...> Reply-To: <[email protected]> Date: Tuesday, February 6, 2024 at 6:49 AM To: <[email protected]> Subject:

Truer statements have never been made.

Looks like for Ex-Link direct set is `\x08\x22\x01\x00\x00\xYY\xZZ` where YY is 00 to 64 (0% to 100%) and ZZ is the checksum (which you'll have to calculate for each volume level). For MDC it's

I have 2-310’s running with CH. 70% of the time, they work every time. That said, they do fail to connect or otherwise “Lock-Up” and require human interactions to reconnect them. Response time

The TSR-310’s I have deployed are all using the latest firmware that was supposed to resolve the waking and latency issues. My major gripe is the latency on when sending a command, pause, play,

DM NVX Tools from Crestron has worked very well for us on all of our NVX jobs, big and small.

MDC or EX-Link? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Diamond) ControlWorks Consulting, LLC Direct:

Hi, i?m currently working on a project with a TSR310 that started as CH, but that I have now moved to SIMPL. In the beginning, there where serious connection issues with the remote to the control

Thanks for the feedback Stefan. Very helpful.

Hi, I use two TSR-310 in my now CH homesystem. Before I was using it in a custom programmed system. It‘s absolutely true, even with the latest firmware and the latest beta OS4 release that this

Thanks for the reply. It seems that the experience with Simpl is a much better one than with CH.? Curious to know if anyone has used the TSR-310 with the latest firmware that is supposed to address