Re: How to use a button with the sensor input on TPMC-4SMD
|
If it¡¯s like the TSW-730/732 it shows up on a device extender (but I¡¯m not opening SIMPL right now to say which one ;) ) ¨C note that
the switch short is from 24 to the input, not the input to ground.
?
I have 40 TSW-732s using a switch in a mic holder to automatically mute/unmute microphones when they are removed/replaced¡ 10 years later still works well (and
a bit of a shame next year when they get replaced with 1070s that I¡¯m going to have to bury a bunch of GLS-SIMs to maintain the same feature¡)
?
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070? | Fax: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer
?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]]
On Behalf Of ckangis
Sent: Tuesday, February 06, 2024 10:10 PM
To: [email protected]
Subject: Re: [crestron] How to use a button with the sensor input on TPMC-4SMD
?
The webpage indicates that it has 2 Occ. sensor inputs. looking in SMW I don't see any triggers into the program (maybe I missed it??)
It may be something dedicated to some built-in app function...
I never used it as I thought it was a little too light-duty for most projects...
|
