开云体育

That's what I thought but their docu was confusing to me, with their example string... Thanks Eric!!

For Crestron you would use \x** to send a hex character. So, you would use \x03 not [0x03]

Hi All, I'll be working on a project with rs-232 control of a Seura Shade 2 TV and have the protocol doc. it lists the following for the start and end characters: ? Start with 0x02 (hex) ? End

I have one controlling a few different brands of fans plus some RF shades in the house. Jay's module works well, but I also have an ISY-994 controlling the same fans with some pretty simple commands.

We used to do this with our Generac and then Kohler. Just used a bunch of 120V DIN rail relays and then watched the inputs on the processor. Caleb Radecky | Manager, Online Products & Services

Something like this would work into the GPIO of another device. https://www.juicegoose.com/images/pdfs/Datasheets/RT-REL_Data_Sheet_R1.pdf

Update...I received a Codec Plus with OS11 and was able to check this myself (previously was working with a tech in the field). What I found is that, unlike 0S10, with OS11 if you have a Cisco widget

I don't personally use the Bond bridge or Bond bridge pro in my own home.? However, I did write a Crestron driver for integrating them with a Crestron system including the use of Bond Sidekick

The Bond Bridge Pro is incredibly reliable and has a great range. I've had the same issues and I'll always install a Bond Pro. I'm in a high-density area in downtown Chicago for the most part and I

In a related subject, Does anyone have an experience about the performance difference with Somfy Shades, between the Bond Bridge and the LinkPro Z gateways regarding range and control reliability?? I

I had to do something similar for a customer that found, during a power outage, that their generator had died and hadn’t been performing its weekly load test. We just wired the coil of a relay to

What I want to do is monitor power in a Generac automatic transfer switch.? L1 and L2 (utility power) E1 and E2 (generator power) and N1 and N2 (power out of the switch to the house). Then shoot off

work perfect with Somfy RTS!

Hi Thorsten, Thanks for letting me know. Jay

Hi Jay, unfortunately, the client is on vacation now for the next three weeks. I?ll try the latest version then. I?ll come back to you on that in three weeks! Cheers, Thorsten Von:

I am interested

Would suit commissioning engineer or junior programmer looking to move on. See the post and details here - https://www.rebarsys.com/careers.html

Hi Thorsten, For some reason I never uploaded this version to my GitHub.? It has been so long ago that I can't remember why but we should start debugging with the latest I worked on. Here is a link

Hi Jasen, in fact, i?m using v1.4 of your module. Can you point me to the 1.5 version? Thanks, Thorsten Von: [email protected] <[email protected]> Im Auftrag von jbasen Gesendet: Sonntag, 16. Juli

Hi Thorsten, It has been over a year since I touched that code but I'm not aware of anything that could be causing the problem you describe. Couple of things. 1) Are you using v1.5 of the Sensibo Air