Hi Jasen,
?
in fact, i?m using v1.4 of your module. Can you point me to the 1.5 version?
?
Thanks,
Thorsten
?
?
Hi Thorsten,
It has been over a year since I touched that code but I'm not aware of anything that could be causing the problem you describe.? Couple of things.
1) Are you using v1.5 of the Sensibo Air Module?
2) Please change the Debug_Msg_Output parameter to "Console".? This causes the code to write all kinds of debugging information to the text console.
3) upload the program to your processor and wait for the program to enter a steady state after all the program initialization steps have completed.
4) Open up a toolbox text console window and perform the actions to duplicate the problem.
5) Copy all the messages sent to the text console window into an email and send that to me.
6) Finally, please send me any relevant information from the error log.
I've found that SimplDebugger loses lots of messages that are generated by an S# program but these are properly picked up by the text console.? Otherwise it would be simpler to simply save a log in SimplDebugger.
I'll take a look and see if I can figure out what is going on.
Thanks
Jay
On 7/15/2023 7:32 AM, Thorsten K?hler wrote:
Hi Jay,
?
the client purchased a Sensibo device (Air) and is successfully controlling his IR-AC using the Sensibo app.
I?ve also successfully integrated the Sensibo Air into the Crestron program running at the client?s CP4.
Your module reports a successful connection and i?m receiving feedback (e.g. target temperature).
I?m able to control the AC, setting it into cooling mode and off mode.
However, after sending just a few (three) commands, the whole program shuts down and a reboot is required. In the console window, it say Program 1 stopping…
?
Any ideas what the issue might be here?
?
Thanks,
Thorsten
?
?
?
?
Hi Thorsten,
Sensibo and Ambi Climate have products that will control an AC unit.? A few years ago I wrote drivers for them.? I haven't touched them since but I believe they are both still workable drivers.? Also, I just saw an announcement that Sensibo has added some interesting new features to their product.?
Hope this helps
Jay
On 6/13/2023 11:37 AM, Thorsten K?hler wrote:
Hi Jason,
?
main driver is actually the Netatmo “Smart AC Controller”.
The client has an AC unit that i?m having issues getting into Crestron as it is remote controlled by a specific remote control unit (with display).
The client came across the Netatmo device and had the idea to use that as some sort of gateway between Crestron and the AC unit.
?
But for that, I need to able to communicate with Netatmo in the first place.
Doesn?t sound if there?s something readily available…
?
Thanks,
Thorsten
?
?
?
I looked at writing a Netatmo integration driver a few years ago.? They use full OAUTH2 authentication protocol which makes integration with a Crestron processor problematic.? If you are looking for a weather station to integrate with I would highly recommend the WeatherFlow Tempest.? Very well designed weather station and I have just made some significant updates to the free driver on my GitHub.?
Hope this helps
Jay
On 6/12/2023 11:03 AM, Thorsten K?hler wrote:
Hi,
?
anyone already doing integration of the Netatmo system into Crestron?
?
Thanks,
Thorsten
