开云体育

Jeff: You mention Program Slots on VC4.? Can you elaborate on that. Am I missing something.? There are no program slots on VC4. An any running program (SIMPL or SIMPL#) requires a room and therefore

Jeff, When the lens cover closes, is the projector completely Off (i.e. the STATUS indicator has stopped flashing and the "cool down" period has ended)? Basically, I'm trying to determine if I can use

Yeah just a simple light that says either On Air or recording. ?The idea is the light would go on any time the smp is recording. ?Preferably maybe something that could be run direct from the IO on

There's lots that the radio broadcast industry offers, many of the relay controlled, but some have their own IP interface as well. What kind of look are you after - just a red light? The traditional

I have a customer who is looking for a good Recording light that can be controlled via the IO on a Extron SMP. ?I thought Extron had some but can’t seem to find. can anyone sugggest a good

I will double check ? Not in front of that PC right now you can also check out Kiel the Coder. ?I used his samples to build mine out.

We created a simpl#pro program that get’s loaded in one of the program slots on VC4. It allows for a programmer to login with credentials and choose which program instance names running to watch,

Thanks, somehow I missed that one!

I've seen scaling issues with other apps on the i14 as well... Bleeding edge tech. :(

So it seems like the Exceptions, Errors and Notices are saved to a file and can also be printed on the linux command line as they happen. Which is great. However, I am still looking for the ability to

Hi chrmac68, ( /g/crestron/profile/4406309 ) what direction did you take with that? CWS, SSH, STCP Server, etc? I really like your idea of being able to input console commands as

I have seen this too. Good idea with the extender- maybe you could use that to drive the on/off state of the video window or even the visibility of it. I may have to try this out

In at least one version of the manual, it gave instructions about copying a .conf file into rsyslog.d directoy to create a creston log file that you could print to with the error.notice function then

Hi, I had implemented a Exterity server control in one of my projects and I was sending channel up/down, device volume and mute commands successfully, until Server was updated (don't know how) to

It took some digging a few months back, I believe it was in the manual, I don't remember where I got it.? If you ssh into the box and type journalctl -u virtualcontrol -f -all you can watch these

I was playing around with a web based console program I wrote. ?I could get print statements to work and was able to get it to allow input of console commands that I added to the S#Pro program. ?

I know that CrestronConsole.PrintLine (I don't know about SIMPL+ PRINT or TRACE) definitely shows up in the syslog, so it's not completely gone.

So, a quick update on this. Using the offline extender, I close the video subpages as soon as the iPad goes offline (task switch or power off iPad) When the app is back in focus it re-connects quickly

What Cisco hardware/firmware? Does joining a Teams meeting using the codec web interface work? As far as I'm aware Teams does not yet work on Cisco hardware, there is a press release about integrating

I'm currently working on a project that requires embedded video on iPad. Done loads of these in the past with few(ish) issues. Here's a new one: With the Embedded Video subpage active on the iPad: *