I'm currently working on a project that requires embedded video on iPad.
Done loads of these in the past with few(ish) issues.
Here's a new one:
With the Embedded Video subpage active on the iPad:
* Task switch away from the app or hit the iPad power button.
* Switch back to the app or turn the iPad back on
The Connecting to System message pops up for a long time (spinner frozen)
Eventually the app will connect and display the embedded video subpage.
On only one occasion (so far), when I task switched away from the Crestron app, the Video window was left frozen on-screen above the iPad desktop. Power off/on cleared it.
Note this was only the video part of the subpage frozen on screen, not the rest of the subpage.
With no embedded video window showing, tasking away/back is almost instant.
Likewise with power off/on.
Seems like the app is screwing the iPad memory when embedded video is showing.
App also crashed once, when switching between cameras.
Crestron Go-Tablet v1.0.24
iOS 14.4.2
iPad Mini (5th Gen)
Crestron Go settings:
Lock Configuration - off
Lock Orientation - Landscape
Auto-reconnect - on
Check for Update - on
Logging Enabled - off
Hide Demo - on
Use improved H.264 Player - on
I did try with improved H.264 Player off, but the only cameras I could display on my network were Axis.
Lillen, Y-Cam & Grandstream would not display.
